Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
May 17th, 2009, 03:11 AM   #1
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,550
Thanks: 419

I Ride: Husaberg FE501e 2003
HK0810 bearings

these are the 4 bearings that hold the sprague and the starter clutch. two reside in the cases and 2 in the left cover.

can anyone tell me any specs on the size of shaft that is meant to fit in them? i guess that it's 8mm but can anyone say they have seen it on paper?

it's just that i see problems with them now and again....

regards

Taffy
Taffy is offline  
 
May 17th, 2009, 09:31 AM   #2
Senior Member
 
Joined: Jan 2007
From: South Wales, UK

Posts: 110
Thanks: 0

I Ride:
RE: HK0810 bearings

10mm shaft and 8mm deep, its a iso part number so std
swsupermoto is offline  
May 17th, 2009, 09:44 AM   #3
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,550
Thanks: 419

I Ride: Husaberg FE501e 2003
RE: HK0810 bearings

it's just that i'm seeeing a lot of play in the sprague assembly and the starter clutch and figured that the specs might be a bit tighter? like 8.1 or 8.2mm?

i've seen several shafts looking shot-up.

so i just wondered aloud if others thought that there was a bit too much wobble on the things....

regards

Taffy
Taffy is offline  
May 17th, 2009, 10:20 AM   #4
Senior Member
 
Joined: Jan 2007
From: South Wales, UK

Posts: 110
Thanks: 0

I Ride:
RE: HK0810 bearings

sorry wrong way round
swsupermoto is offline  
December 7th, 2010, 12:10 PM   #5
Member
 
Joined: Nov 2010
From: Poland city Jelenia Góra

Posts: 49
Thanks: 0

I Ride:
Re: HK0810 bearings

And what with that extra play in the sprague assembly bearings, did you come up with something Taffy?
I was going to replace them beacuse of that extra play ,but i see it will not help.
My outter gear wipes out the engine case
PolandHusa is offline  
December 7th, 2010, 11:51 PM   #6
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,550
Thanks: 419

I Ride: Husaberg FE501e 2003
Re: HK0810 bearings

no i never did anything.

all I will say is that i have twice had husabergs in with these worn out and they make a unique sound.

they jump every two seconds so:
wah-wah, wah-wah, chung, wah-wah, wah-wah, chung! wah-wah, wah-wah, chung!

this is because the sprague assembly instead of TURNING the clutch - it tries to climb it.

regards

Taffy
Taffy is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
bearings, hk0810



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
SKF v's other bearings ? wildman Husaberg 6 January 31st, 2010 01:38 AM
Cam Bearings Badvoc Mechanical 3 March 22nd, 2009 06:36 PM
SKF bearings...? No-angel Mechanical 3 March 19th, 2008 08:44 AM
cam bearings sparks Mechanical 4 May 19th, 2007 12:40 PM
big end bearings popup Mechanical 5 January 15th, 2007 10:46 AM


Facebook Twitter Google+ RSS Feed