Go Back   Husaberg Forum > Husaberg Forum > Husaberg

Husaberg Husaberg Forum - Husaberg Motorcycle Forum

LinkBack Thread Tools Display Modes
June 30th, 2008, 06:49 PM   #1
Senior Member
pollo's Avatar
Joined: Jun 2008
From: Simi Valley Ca.

Posts: 1,092
Thanks: 98

I Ride: 2006 FS650e, 2007 FE550e, 2016 Ktm500Exc
Modified blinker bracket

Here'e a picture of my blinkers. I cut the steel bracket near both ends, overlapped them an inch or so on each side and welded back together. The result is more of a flush look. The blinkers come out just past the plastic. Also in the pic, the scott damper and Renthal twin wall fat bar. The megura feels a little wide. The twin wall is awsome and you can chose the bend. Mines the Windam.
Attached Thumbnails
Modified blinker bracket-06-30-08_1635.jpg  
pollo is offline  

  Husaberg Forum > Husaberg Forum > Husaberg

blinker, bracket, modified

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
TE 300 rear light / blinker bracket fits 570? tourist Electrical 0 December 17th, 2013 12:41 PM
650 OEM exhaust modified? Tamas Exhausts 2 March 14th, 2013 01:35 PM
Right blinker causes double flash mrt10x Electrical 1 June 18th, 2012 11:44 AM
Blinker problem pollo Electrical 9 June 30th, 2009 03:53 PM
Modified FC450-06 omo Husaberg 3 June 28th, 2006 02:05 PM

Facebook Twitter Google+ RSS Feed