Go Back   Husaberg Forum > Husaberg Forum > Husaberg

Husaberg Husaberg Forum - Husaberg Motorcycle Forum

LinkBack Thread Tools Display Modes
April 30th, 2007, 05:28 AM   #11
Senior Member
Joined: Jan 2007
From: Central Coast NSW Australia

Posts: 390
Thanks: 0

I Ride:
Hi faktor
Weird problem but the pads are obviously not returning for some reason. Ausberg could be onto something with the no expansion theory.
The Brembos are the same setup as any other brakes. They have a rubber seal around the piston.
Take it off, rip it apart and clean everything using aerosol brake cleaner and check bore and piston for any scoring/damage etc.
If it's not damaged and not leaking then lube it up with nice clean brake fluid and re-assemble. You shouldn't need a kit unless you damage something.
I find it easiest to remove piston with compressed air. If you use air place a rag in there to catch the piston when it comes firing out.
Totally re-bleed system and check if they release. Problem may be in master cylinder.
Good luck.
Coastie is offline  
April 30th, 2007, 09:03 AM   #12
ned37's Avatar
Joined: Dec 2004
From: back in cottonwood, az

Posts: 2,319
Thanks: 196

I Ride: '08 HUSKY te610
i'm guessing the brake pedal plunger that goes into the master cylinder is too far extended for some mechanical reason. does the caliper piston retract if you pull the plunger rod clip and remove it?
ned37 is offline  
April 30th, 2007, 09:20 AM   #13
Joined: Jan 2007
From: chester england

Posts: 71
Thanks: 0

I Ride:
slacken the rear break leaver adjuster off its the round disc just abouve the break leaver arm with an off set allen screw it might have been knoked and is holding the rear break on
wesh155 is offline  
May 1st, 2007, 01:39 AM   #14
Senior Member
Joined: Apr 2004
From: Murray Sunset, Australia

Posts: 850
Thanks: 1

I Ride:
Wesh155 you are a legend that was the problem mate. Once i loosened the lever adjuster off a little i could push the piston in the calliper in alot easier.

Also thankyou all others for your input in trying to help solve my Brake Problem.
faktor is offline  

  Husaberg Forum > Husaberg Forum > Husaberg

brake, caliper, needed, problemhelp

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Rear Brake problem and Brake Fluid Question jaminlove Wheels and Tires 3 May 5th, 2013 09:45 PM
Adaptor for Brembo 4piston brake caliper on husa 03 WP fork? ElSnorro Wheels and Tires 0 August 30th, 2007 10:47 AM
320mm brake caliper adapter lost in the mail Mackberg SuperMoto 2 June 2nd, 2006 04:43 AM
Brake Pad options - Radial Caliper ronwest99 SuperMoto 2 October 17th, 2005 09:57 PM

Facebook Twitter Google+ RSS Feed