Go Back   Husaberg Forum > Husaberg Forum > Husaberg

Husaberg Husaberg Forum - Husaberg Motorcycle Forum

LinkBack Thread Tools Display Modes
December 19th, 2021, 09:36 PM   #1
Senior Member
canolman's Avatar
Joined: Sep 2013
From: canolbarth cymru

Posts: 369
Thanks: 210

I Ride:
Crank end float, axial play

Just wondering here about end float?
Just rebuilding a 628cc crank and about to check and adjust if need be the axial play.
My other engines have always been around .75-.85mm without any adjustment and run perfectly. A quick measure of this engine ands its just over 1mm.
What are the consequences of too much end float?
Easy enough to adjust but just got me thinking as I read plenty about too little clearance?
canolman is offline  
December 20th, 2021, 11:14 AM   #2
Joined: Jan 2014
From: Germany

Posts: 41
Thanks: 32

I Ride:
Axial play should be around 0.6-0.7mm.
jojo09 is offline  

  Husaberg Forum > Husaberg Forum > Husaberg

axial, crank, end, float, play

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
FS650 No Axial play GAVBEY Mechanical 5 October 27th, 2015 05:57 PM
Help Axial play... What play ... GAVBEY Mechanical 2 April 17th, 2015 03:47 AM
Crank axial play check and flywheel change kli Mechanical 3 August 28th, 2012 11:17 PM
Rockers axial play way out of limit kli Mechanical 5 October 22nd, 2011 07:39 AM
clutch axial play, and kickstarter wille Mechanical 2 February 5th, 2009 10:39 AM

Facebook Twitter Google+ RSS Feed