Husaberg
Go Back   Husaberg Forum > Husaberg Forum > Husaberg

Husaberg Husaberg Forum - Husaberg Motorcycle Forum


Reply
 
LinkBack Thread Tools Display Modes
April 26th, 2021, 02:28 PM   #1
Junior Member
 
Joined: Apr 2021
From: Kosovo

Posts: 3
Thanks: 0

I Ride:
Help needed, husaberg fe 350

Hello guys, i am a new dirt bike rider and my first bike is husaberg fe 350 , 2013 Today my bike drowned a little on the water( not too long) but i am worried and i wonder if you can help me with any advice what to do.
endurokos is offline  
 
April 26th, 2021, 11:42 PM   #2
Member
 
Joined: Jul 2020
From: tilba nsw australia

Posts: 31
Thanks: 10

I Ride: Berg TE250 '13- gone!KTM 990SMT- gone! Berg FE570 '12 (my dream bike for years!) TY250 TY80 original
Too easy- just clean and reoil the air filter, fire it up and get it hot, change the oil and filter.

If the oil comes out full of water, take it for a short run through all gears, make sure it's hot and change the oil again, but this will probably not be necessary.

The other thing to check is the ECU connector- under the seat, behind the tank, rubber boot with wiring going in- pull boot back, if there is any water inside, pull connector off, clean and dry out both sides- blow out with compressed air if possible- reassemble, making sure rubber boot is secure all round. Water in there can cause all sots of wierd issues in the future.

Don't stop in deep water again!
rikschipp is offline  
April 28th, 2021, 12:09 PM   #3
Member
 
Joined: Dec 2018
From: New Zealand

Posts: 30
Thanks: 1

I Ride: 2001 Husaberg FE650
Not sure if this applies to newer bikes, but water getting in the stator is a problem on my 2002. Other people on here would know better but maybe take your stator cover off and dry that out?
Springarn is offline  
May 12th, 2021, 10:08 AM   #4
Member
 
Joined: Jan 2014
From: Germany

Posts: 34
Thanks: 31

I Ride:
Originally Posted by Springarn View Post
Not sure if this applies to newer bikes, but water getting in the stator is a problem on my 2002. Other people on here would know better but maybe take your stator cover off and dry that out?
The newer ignitions all run in oil -not dry like 1989-2008.
jojo09 is offline  
August 25th, 2021, 10:46 PM   #5
Junior Member
 
Joined: Aug 2021
From: CN

Posts: 6
Thanks: 0

I Ride:
Mine was damaged due to a rude driveway and I was unable to find the OEM part. The best I came up with was this: https://autowikius.com/. It was a loittle more than I wanted to spend, but the car looks much better overall.
heyteaok is offline  
Reply

  Husaberg Forum > Husaberg Forum > Husaberg

Tags
350, husaberg, needed



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help needed!!!!!!!!!!!! Big kev Mechanical 12 August 26th, 2012 02:11 AM
husaberg 650 fs 2003 help needed dminto69 Mechanical 2 March 22nd, 2012 01:26 PM
Midwest Husaberg mechanic needed Mackberg Mechanical 2 April 4th, 2009 03:43 PM
Husaberg Logo Needed - Vector or EPS file? awilksch Husaberg 3 February 6th, 2007 12:51 AM


Facebook Twitter Google+ RSS Feed