Husaberg
Go Back   Husaberg Forum > Husaberg Forum > Husaberg

Husaberg Husaberg Forum - Husaberg Motorcycle Forum


Thanks Tree3Thanks
  • 2 Post By husabutt
  • 1 Post By Taffy
Reply
 
LinkBack Thread Tools Display Modes
June 13th, 2019, 08:45 AM   #1
Junior Member
 
Joined: Jul 2018
From: Sweden

Posts: 7
Thanks: 0

I Ride: FE 400 1998
Coolant leaking from small hole

After filling the coolant up i realized that there was a small hole in the waterpump area leaking coolant and i don't know why, is there anyone who knows what this hole is then please tell me. It's a Husaberg Fe400 1998
Attached Thumbnails
Coolant leaking from small hole-15604405843944901247627072886238.jpg  
Pedro Daquota is offline  
 
June 13th, 2019, 08:49 AM   #2
Senior Member
 
husabutt's Avatar
 
Joined: Feb 2003
From: Escondido, Ca. USA

Posts: 3,072
Thanks: 323

I Ride: 2005 Fe450,2001 Fx470,1997 Fx600
Its a weep hole that indicates the water pump seal needs to be replaced.
Thanks from Cali and Pedro Daquota
husabutt is offline  
June 13th, 2019, 08:51 AM   #3
Junior Member
 
Joined: Jul 2018
From: Sweden

Posts: 7
Thanks: 0

I Ride: FE 400 1998
Thanks,
Pedro Daquota is offline  
June 13th, 2019, 12:24 PM   #4
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,769
Thanks: 462

I Ride: Husaberg FE501e 2003
try and only use the factory water pump seals 0844......... they are easily the best.

a;so, fit two new cam bearings and leave them with the rubber seals on. let them run in their own grease.

these new 6201c3s will be tighter and hold the shaft firmer from wobbling off centre. it isn't a waterpump shaft, it is a camshaft -first.

Taffy
Thanks from Pedro Daquota
Taffy is offline  
June 14th, 2019, 09:52 AM   #5
Junior Member
 
Joined: Jul 2018
From: Sweden

Posts: 7
Thanks: 0

I Ride: FE 400 1998
Originally Posted by Taffy View Post
try and only use the factory water pump seals 0844......... they are easily the best.

a;so, fit two new cam bearings and leave them with the rubber seals on. let them run in their own grease.

these new 6201c3s will be tighter and hold the shaft firmer from wobbling off centre. it isn't a waterpump shaft, it is a camshaft -first.

Taffy
Could you send me a link to where i could get new rubber seals as i dont know where and what fits this model.
Pedro Daquota is offline  
June 14th, 2019, 11:44 AM   #6
Member
 
Joined: May 2018
From: England

Posts: 66
Thanks: 21

I Ride:
Originally Posted by Pedro Daquota View Post
Could you send me a link to where i could get new rubber seals as i dont know where and what fits this model.
http://taffmeisters.co.uk/index.php?cPath=36_126

Sent from my ASUS_X01BDA using Tapatalk
Spuddy18 is offline  
June 14th, 2019, 02:00 PM   #7
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,769
Thanks: 462

I Ride: Husaberg FE501e 2003
what I meant was 'get new bearings with the rubber seals still in them.

100100
100105

cheers

Taffy
Taffy is offline  
June 14th, 2019, 05:29 PM   #8
Senior Member
 
husabutt's Avatar
 
Joined: Feb 2003
From: Escondido, Ca. USA

Posts: 3,072
Thanks: 323

I Ride: 2005 Fe450,2001 Fx470,1997 Fx600
Taffmeisters - Husaberg, KTM, Husqvarna, Gas Gas, dirt bikes - servicing, tuning, rebuilds, parts

Taffmeisters - Husaberg, KTM, Husqvarna, Gas Gas, dirt bikes - servicing, tuning, rebuilds, parts
husabutt is offline  
Reply

  Husaberg Forum > Husaberg Forum > Husaberg

Tags
coolant, hole, leaking, small, waterpump



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Weep hole leaking? fallenmoons Cooling Systems 11 February 27th, 2019 07:10 PM
Weep hole leaking oil Mackberg Mechanical 35 May 16th, 2013 05:48 AM
small hole behind waterpump. pastullo Mechanical 13 February 23rd, 2008 08:25 AM
Small leaking from kickstartaxis. boheme Mechanical 4 May 16th, 2005 07:46 AM
Coolant out of weep hole? EuroEnduro Mechanical 6 February 16th, 2005 12:57 PM


Facebook Twitter Google+ RSS Feed