Go Back   Husaberg Forum > Husaberg Forum > Husaberg

Husaberg Husaberg Forum - Husaberg Motorcycle Forum

LinkBack Thread Tools Display Modes
February 1st, 2019, 07:43 AM   #1
Junior Member
Joined: Feb 2019
From: Portugal

Posts: 2
Thanks: 0

I Ride:
Question Husaberg fe400 98 parts problem

Good afternoon to you all im new and i have a husaberg fe400 from 98 e bought it about half year ago i did normal service and rode it in the summer a lot on the dirt for about 2 months after that when it got hot it just stall and died and i couldnt start it by foot only with pushstart like downhill but when cold it started by foot and after some weeks it didnt started by foot either only downhill or pushing it then i stopped it and checked the carburator it was ok and opened the valve cover and the exhaust valves had clearence but the admission dont have any clearence and a guy who works and as experience tried to get clearence but it was impossible seems like the valves are worned out the problem is i cant find new ones or used anywhere my mechanic tried to look for parts contacts and i by the internet and everything is sold or it isnt produced anymore. Any tips, solutions, equal valves from other manufacters or left over stocks or same size other brands? Big problem im from Portugal and husabergs are rare and not common here.

Last edited by Simaomadaleno; February 1st, 2019 at 08:06 AM.
Simaomadaleno is offline  
February 1st, 2019, 08:11 AM   #2
Senior Member
Joined: Nov 2001
From: Ely, England

Posts: 16,022
Thanks: 495

I Ride: Husaberg FE501e 2003
we have many good Portuguese members here.

I have all the parts you need.

it could be that the inlet valve has sunk so far that the tappet pad cannot get away from the valve without the pad touching the underside of the rocker arm.

the tappet pad operates at an angle and if it is unscrewed, it touches the underside of the rocker arm and 'straightens up'. this REDUCES the valve clearance!.

you will have 31/27 valves. I have 32.5mm inlets which would give a little more poser. I don't have any 31s though. maybe somebody put new 30s in and the valves fell in the hole?

go to my web shop and have a look.


Taffy is offline  

  Husaberg Forum > Husaberg Forum > Husaberg

fe400, husaberg, parts, problem

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Husaberg fe400 98 parts problem Simaomadaleno Mechanical 2 February 14th, 2019 01:48 AM
FE400 Gearbox problem - 4th gear jumps to 3th zaga Mechanical 2 June 5th, 2013 05:37 AM
FE400 Carb Problem xbakerbob Fuel 2 January 3rd, 2010 12:36 PM
fe400 fuel or electrical problem?? Bif Husaberg 0 October 23rd, 2009 12:51 PM
Starting problem Husaberg FE400 '03 ElSnorro Mechanical 11 August 20th, 2007 10:39 AM

Facebook Twitter Google+ RSS Feed