Husaberg
Go Back   Husaberg Forum > Husaberg Forum > Husaberg

Husaberg Husaberg Forum - Husaberg Motorcycle Forum


Thanks Tree5Thanks
Reply
 
LinkBack Thread Tools Display Modes
November 6th, 2018, 12:47 AM   #11
Member
 
Joined: Jan 2017
From: Brisbane

Posts: 37
Thanks: 13

I Ride:
https://auto.jofogas.hu/pest/Husaber...t_83201203.htm incase anyone's wanting. Also on the same site is new 550 liner and piston
Thanks from tourist
76model is offline  
 
November 6th, 2018, 12:57 AM   #12
Member
 
Joined: Jan 2017
From: Brisbane

Posts: 37
Thanks: 13

I Ride:
https://auto.jofogas.hu/pest/Husaber...t_84804036.htm
76model is offline  
June 12th, 2019, 12:03 PM   #13
Member
 
mars's Avatar
 
Joined: Jun 2004
From: denton texas

Posts: 63
Thanks: 3

I Ride: 2010 KTM250SX, 2001 Husaberg FC550
Conrods

I have recieved my two new rods from CP-Carrillo in CA a few months ago. Crank Works in AZ assembly the crank. All has gone well with the new rod. I had purchased the big end pin and bearing and all other parts for the rebuild from Taffy. Thanks Taffy.

This is the PN# from CP-Carrillo: HG_0550_OAT_4852DOC. Lot #:97223-182-100, Center to center is 4.852"/123.240mm, the rod was for 2001 FC550.

Mars
Husaberg FC550 2001
KTM 250SX 2010
mars is offline  
Reply

  Husaberg Forum > Husaberg Forum > Husaberg

Tags
aftermarket, conrods, replacement, supply



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Aftermarket or custom Conrods Pistons pins bushmechanic Mechanical 27 April 17th, 2015 02:49 AM
Conrods. bergbro Mechanical 6 August 29th, 2010 12:51 AM


Facebook Twitter Google+ RSS Feed