Husaberg
Go Back   Husaberg Forum > Husaberg Forum > Husaberg

Husaberg Husaberg Forum - Husaberg Motorcycle Forum


Reply
 
LinkBack Thread Tools Display Modes
March 25th, 2018, 03:43 PM   #1
Junior Member
 
Joined: Mar 2018
From: UK

Posts: 8
Thanks: 0

I Ride:
2014 te 300 questions

Hi

I just bought a 2014 TE 300. I noticed that it doesnít have a map switch- was this a standard feature or not?

Also I read somewhere that the vforce reeds were standard but my bike doesnít have the vforce label on the reeds block.

Please could someone confirm whether the above were definately a standard fit?

Many Thanks
sz00 is offline  
 
March 25th, 2018, 11:22 PM   #2
Senior Member
 
Huskyfatman's Avatar
 
Joined: Mar 2006
From: SO.NV.

Posts: 220
Thanks: 71

I Ride:
They switched to boyesen reeds in Ď14 and didnít come with the switch, though itís super easy to install.
Huskyfatman is offline  
March 26th, 2018, 12:37 AM   #3
Junior Member
 
Joined: Mar 2018
From: UK

Posts: 8
Thanks: 0

I Ride:
Great, thanks very much for the quick response

Does anyone have a link to a thread showing how to install connect a map switch?
sz00 is offline  
March 26th, 2018, 03:51 AM   #4
Junior Member
 
Joined: Mar 2018
From: UK

Posts: 8
Thanks: 0

I Ride:
One more question - are the stock pistons on these cast or forged?
sz00 is offline  
March 26th, 2018, 04:32 AM   #5
Senior Member
 
WArdogG's Avatar
 
Joined: Jul 2012
From: South Africa

Posts: 201
Thanks: 74

I Ride: FS650 '08/FS650 '04/FE501 '03/FX470 '02
Hi, I believe it is a cast vertex piston.

If you remove the fuel tank, there is a male and female bullet lug stuck together, in this position it is standard map, when they are saparated it is in low map. This is where the map switch plugs in.

You can find ktm or husqvarna manuals at the respective manufacturers websites, either of the ktm or husq manuals will have the exact location of the connector for the map switch.

What you are looking for looks something like this below

https://www.google.com/url?sa=i&rct=...22153781334109
WArdogG is offline  
March 26th, 2018, 11:30 AM   #6
Junior Member
 
Joined: Mar 2018
From: UK

Posts: 8
Thanks: 0

I Ride:
Aweome, thanks very much!
sz00 is offline  
March 27th, 2018, 11:27 PM   #7
Junior Member
 
Joined: Mar 2018
From: UK

Posts: 8
Thanks: 0

I Ride:
Hi all, couple of more questions on the 2014 TE300

What engine and transmission oil are you using? The most obvious is choice is the reccomended Motorex Cross Power 2t and Top Speed 4t (for the clutch and transmission) but is there anything better I should use? I have been running Castrol Power 1 Racing for years in my other 2t dirt bike with no issues at all. I wonder whether I should stick to this or switch to Motorex as reccomended.

Also the reccomended mix is 1:60 but I know that most are mixing 1:50 for some extra protection.. any advice on this?

Finally does anyone know where can buy some frame touch up paint? From what I found the paint should be RAL 7016 Anthracite Grey but my frame appears to have some metalic finish so I am not sure I am loking for the correct paint code...

Many Thanks
sz00 is offline  
Reply

  Husaberg Forum > Husaberg Forum > Husaberg

Tags
2014, 300, questions



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Want To Buy: 2014 te 300 Miberg Want To Buy 1 October 6th, 2017 08:36 AM
Fe 350 2014 webfoot Service Manuals 2 June 9th, 2016 04:12 PM
2014's??? tazer Husaberg 10 April 23rd, 2015 04:23 PM
looking for 2014 350 FE coryabc Service Manuals 3 November 26th, 2014 04:19 AM
2008 FE550 - questions, questions, questions... Hawaii-Rider Husaberg 6 March 1st, 2012 01:11 PM


Facebook Twitter Google+ RSS Feed