Go Back   Husaberg Forum > Husaberg Forum > Husaberg

Husaberg Husaberg Forum - Husaberg Motorcycle Forum

LinkBack Thread Tools Display Modes
September 9th, 2005, 10:30 PM   #1
Junior Member
rgrant's Avatar
Joined: Jul 2005

Posts: 10
Thanks: 0

I Ride:
2001 FE501E Value

A local dealer has had a 01 FE501E for sale for quite a while,probably 2 years now. They were asking $4800, now down to $3800. I looked at it a couple of days ago and its a little rough but not too bad, other than a ripped seat cover and a blown head gasket. I'd like to get it but certainly not for anything even close to $3800 with the head gasket. Any opinions on a fair price for it? I bought a 98 FE400E from them last month, good for the woods but not quite enough power for street use. I'll keep the 400 for woods and trails and would like the 501 for street use. Should i even bother with the 501, but instead look for a 600 for street use?


rgrant is offline  
September 9th, 2005, 11:02 PM   #2
berger's Avatar
Joined: Apr 2002
From: Phoenix Arizona

Posts: 3,146
Thanks: 9

I Ride: the pine
I don't think I would bother with that one anyways. Your dealer obviously thinks he has something special there. It's not worth insulting him, or have him perceive insult. There are lots of good bikes out there in the 2500-3500 range if you shop around.
berger is offline  
September 9th, 2005, 11:34 PM   #3
Senior Member
Joined: Mar 2005
From: Mesa, AZ

Posts: 2,713
Thanks: 3

I Ride:
2500 if it has some good aftermarket parts.
LeFrog is offline  
September 10th, 2005, 12:21 AM   #4
Senior Member
Joined: Jan 2004
From: USA

Posts: 695
Thanks: 0

I Ride:
See if Ammo still has his 470 for sale.It
had all the FE equipment on it.You can
probably get it for 2500.00.It's an 02.
t-jet-tim is offline  

  Husaberg Forum > Husaberg Forum > Husaberg

2001, fe501e

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Any tricks to Cold starting a 2001 FE501e? ajw30 Mechanical 8 February 2nd, 2011 08:53 PM
2001 FE501E Noobie Motor Questions E900Vadar Mechanical 1 April 1st, 2008 06:15 PM
stator for fe501e 2001 jaclan Electrical 3 November 9th, 2006 11:11 AM
Finally got the 2001 FE501E going again DaleEO Ride Reports 6 June 21st, 2005 10:00 AM
Casting number on rod of 2001/2 550 vs. 2001/3 501-2003 550? PowerFiend Mechanical 0 June 23rd, 2004 05:21 PM

Facebook Twitter Google+ RSS Feed