Husaberg Forum

Husaberg Forum (http://husaberg.org/husaberg-forums.php)
-   Husaberg (http://husaberg.org/husaberg/)
-   -   Looking for guy that makes the fuel tank... (http://husaberg.org/husaberg/24730-looking-guy-makes-fuel-tank.html)

Dualsport4ever December 29th, 2017 04:46 PM

Quote:

Originally Posted by Alan (Post 184285)
The 70* tanks loose a lot of volume due to the position of the breather. It needs to be more to the rear as there is quite an air pocket. I drilled a hole further rearward and screwed in a self tapper. It not only increases the capacity over standard but helps balance very quickly.

Good info. Did you plug the original breather hole or just keep it and T it in? Roughly how much farther rearward did you move it? I like your comment about faster equalization when filling. Some have mentioned it can be agonizingly slow to fill which is why I've yet to install my subframe tank (gen 3) I bought 3 years ago:o. Any issues with stressing the fuel pump with the subframe tank installed?

Alan December 29th, 2017 05:17 PM

Quote:

Originally Posted by Dualsport4ever (Post 184329)
Good info. Did you plug the original breather hole or just keep it and T it in? Roughly how much farther rearward did you move it? I like your comment about faster equalization when filling. Some have mentioned it can be agonizingly slow to fill which is why I've yet to install my subframe tank (gen 3) I bought 3 years ago:o. Any issues with stressing the fuel pump with the subframe tank installed?

Breather still at original spot.

The biggest problem with the equalisation is the routing of the breather hose. I originally had it going down then back up to meet at the main tank breather. What I have done now is run the breather tube along the seat rail into the airbox and out further up where it runs along rad shroud. This helps equalise heaps quicker but not as quick as removing this screw. I have a hole in the rear plastics so I can access this screw. Now there is no hesitation in equalising and I gain some fuel.

Stressing fuel pump? Geez no.

Get that tank fitted.

Iíll get some pics up when I get back from my high country trip in a few days.

930 Berg January 14th, 2018 05:49 AM

70 degree tank
 
Chris,
Count me in if you plan on building a Tao for the 70 degree crowd.

Thank you,
Rich

Pundy January 20th, 2018 05:17 AM

I want a tank too if you do a run of them. Thanks, Sam

NoClassic January 20th, 2018 10:24 AM

Sign me up as well if they can come in around the cost of the original 70 degree version.

Calv January 25th, 2018 02:46 PM

I'd love to get hold of a tank too! Hope your'e able to make it happen.
Cheers, Calv

Peter570 February 5th, 2018 01:42 AM

Hi Chris, i plan to do a trip through central Aus in July and would be really keen for a sub frame tank for the trip.

smbcj April 27th, 2018 02:31 AM

I would be interested in one too. 👍

Zak May 6th, 2018 08:14 PM

Yes please
 
I'm close to pulling the trigger on a safari but would much rather have a subframe tank. I'll watch this for a while before I do anything.

Alan May 6th, 2018 08:32 PM

Why don’t some of you guys give converting the subframe into a tank a go? Nothing to loose. There has been recent discussion on the success of these. The latest 570 I have purchased has had the subframe converted successfully with no leaks


All times are GMT -8. The time now is 05:16 PM.

Copyright © 2019 Husaberg Forum. All rights reserved.