Go Back   Husaberg Forum > Husaberg Forum > Husaberg

Husaberg Husaberg Forum - Husaberg Motorcycle Forum

LinkBack Thread Tools Display Modes
May 16th, 2017, 01:17 AM   #1
Junior Member
Joined: May 2017
From: North Yorks

Posts: 2
Thanks: 0

I Ride:
Fitting KTM SM wheels on a 05/06 Husaberg FE450

I've bought a set of SM wheels from I believe a mid to late 90's KTM. The rear fits perfectly into my FE450 but the front is proving more challenging. It will physically fit between the fork sliders fine so there's no issue with clearance but the bearings in the hub are 17mm internal diameter, the diameter of the fork legs where the spindle slides through is 30mm on one side and 26mm on the other. My plan had been to use the front spindle reduction kit from Jim Aim that (I think) enables a 20mm spindle to be used with my forks but I can't get a set of bearings with 20mm id to go in my hubs which are 35mm external diameter on one side and 40mm on the other. I haven't got a 17mm spindle but presumably if I can get one long enough I could get some spacers made up and just use that but I'd prefer to use the bigger spindle if possible but the lack of suitable bearings is preventing this. Anyone got any suggestions?
lodgey47 is offline  

  Husaberg Forum > Husaberg Forum > Husaberg

05 or 06, fe450, fitting, husaberg, ktm, wheels

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
RMZ450 wheels fit on a fe450 Kostrzewa Wheels and Tires 0 August 5th, 2014 04:52 AM
Fitting Motard Rims to my FE450 . 5 inch rear can fit ? pistole Husaberg 3 July 1st, 2014 07:10 AM
Fitting for wheels on 97' FE400 Compatibility? EnduroFreak Wheels and Tires 0 October 13th, 2010 08:52 AM
KTM wheels fitting a Husaberg s-10s_rule Suspension 3 August 22nd, 2006 10:57 AM
Fitting enduro wheels to a FS650e dcp Husaberg 6 March 10th, 2006 02:37 AM

Facebook Twitter Google+ RSS Feed