Husaberg
Go Back   Husaberg Forum > Husaberg Forum > Husaberg

Husaberg Husaberg Forum - Husaberg Motorcycle Forum


Reply
 
LinkBack Thread Tools Display Modes
April 13th, 2017, 03:51 AM   #1
Junior Member
 
Joined: Sep 2016
From: Marseille

Posts: 3
Thanks: 1

I Ride: FE400E 2002
Torque value for starter clutch (tightening)

Hi,

I rebuild an FE400E 2002, and I have a question about the value for tightening the nut and the smaller gear.

I unmounted the clutch without TQ wrench, and before read somes post of this forum.

Can you give me a approximative value, I will do somes adjustement to have the correct value. (between 25/30LB)

PS : I have already buy the Taffmeister's starter repair kit, also after have unmount the clutch !

Thanks.
Yack is offline  
 
April 13th, 2017, 08:20 AM   #2
Moderator
 
ned37's Avatar
 
Joined: Dec 2004
From: back in cottonwood, az

Posts: 2,233
Thanks: 135

I Ride: 04 FE650E
where's froggy when you need him?
what nut are you talking about? what smaller gear?
ned37 is online now  
April 13th, 2017, 08:22 AM   #3
Senior Member
 
plumbbob's Avatar
 
Joined: Aug 2008
From: England, Southampton

Posts: 692
Thanks: 106

I Ride: 02 650 StreetTracker, 08 FE450, 92 Triumph Cafe Racer.
Hi Yack,

if you look in the Wiki at the top of the page under "engines modifications" details should be under torque limiter or sprague.

Carl.
plumbbob is offline  
April 13th, 2017, 09:34 AM   #4
Junior Member
 
Joined: Sep 2016
From: Marseille

Posts: 3
Thanks: 1

I Ride: FE400E 2002
The first time, when I dismounted my starter clutch, I didn't take the tightening value, I didn't know.

Now, I try to remount the starter clutch and I don't know at which value to tightening the nut.
Yack is offline  
April 13th, 2017, 10:18 AM   #5
Senior Member
 
plumbbob's Avatar
 
Joined: Aug 2008
From: England, Southampton

Posts: 692
Thanks: 106

I Ride: 02 650 StreetTracker, 08 FE450, 92 Triumph Cafe Racer.
I couldn't find it on my manual but I would go for around 15nm with some thread lock.

Then check to see at what torque the clutch is slipping, this needs to be 20-25nm. If it slips earlier it can be shimmed, as described in the Wiki.

Carl.
plumbbob is offline  
Reply

  Husaberg Forum > Husaberg Forum > Husaberg

Tags
clutch, starter, tightening, torque



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Head bolts Tightening torque Briceyberg Husaberg 3 January 17th, 2017 12:10 AM
Husaberg 570 steering head screws tightening torque values? toivias Suspension 5 August 25th, 2014 07:17 PM
starter torque limiter mod and timing chain question helithumper Mechanical 5 July 17th, 2012 02:51 PM
Torque spec - clutch center nut husky123 Mechanical 1 May 21st, 2010 11:41 AM
Starter torque limiting gear/clutch/pain in the arse. RedRockRider Mechanical 15 January 17th, 2009 04:06 AM


Facebook Twitter Google+ RSS Feed