Husaberg
Go Back   Husaberg Forum > Husaberg Forum > Husaberg

Husaberg Husaberg Forum - Husaberg Motorcycle Forum


Thanks Tree1Thanks
  • 1 Post By ned37
Reply
 
LinkBack Thread Tools Display Modes
January 5th, 2017, 09:38 PM   #1
Junior Member
 
Joined: Jan 2017
From: Midwest

Posts: 4
Thanks: 0

I Ride: 1997 husaberg fe600e supermoto conversion.
1997 Husaberg Fe600e

Hello, im new to the page, and i am the new owner of a 1997 husaberg fe600e supermoto built on supermotojunkies.com. i bought the bike barley running, backfiring and loss of power before half throttle, basically to make a long story short i figured out my flywheel and stator are bad, the previous owner said the stator bolts werent tightened and it caught up on the flywheel. So ive been looking for a flywheel and i cant fond one, my question is, is there somewhere i can get a flywheel or is there one that is compatable through ktm, or husky? Thanks for any reply, id love to get this thing on the road and anything helps.
Attached Thumbnails
1997 Husaberg Fe600e-dsc00701_zpse3dfa46c.jpg  
Fe600eSupermoto is offline  
 
January 6th, 2017, 09:56 AM   #2
Moderator
 
ned37's Avatar
 
Joined: Dec 2004
From: back in cottonwood, az

Posts: 2,188
Thanks: 124

I Ride: 04 FE650E
just keep your eyes on ebay for any flywheel for any size '89-'98 model fe. you can get your stator rewound by searching the website. or just Contact - Husaberg, Husaberg Parts, Taffmeisters UK
Thanks from tourist
ned37 is offline  
January 9th, 2017, 04:42 AM   #3
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 14,551
Thanks: 255

I Ride:
i'm going to bet that the flywheel is OK. it is the stator.....

they can suffer those pre '99s. I have found that the ignition timing was wrong, the tappets were wrong, the carb was completely phuqed and they had basically kicked the shi* out of them!!!!

I do some videos on the pre 2000s on my Faceboook page. Ned is right, my tickover was too high and this altered the ignition timing, luckily it was still correct.
6d BTDC at a lower idle = correct
7d BTDC on a higher idle = the above plus a few revs.

regards

Taffy
Taffy is offline  
February 1st, 2017, 11:44 PM   #4
Junior Member
 
Joined: Jan 2017
From: Midwest

Posts: 4
Thanks: 0

I Ride: 1997 husaberg fe600e supermoto conversion.
I was told by a previous owner that the flywheel, stator and regulator were bad when he sold it to the guy i got it from
Attached Thumbnails
1997 Husaberg Fe600e-screenshot_2017-02-02-01-39-28.jpg  
Fe600eSupermoto is offline  
February 1st, 2017, 11:45 PM   #5
Junior Member
 
Joined: Jan 2017
From: Midwest

Posts: 4
Thanks: 0

I Ride: 1997 husaberg fe600e supermoto conversion.
I wish i still had a factory stator so i could just get it rewound and see what happens
Fe600eSupermoto is offline  
February 2nd, 2017, 12:20 AM   #6
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 14,551
Thanks: 255

I Ride:
you need to stop whinging fella. and you are whinging.

send your flywheel and stator to me here in the UK and I will test them on my 1998. I charge 30 which is about $45 plus about $15 home OK? if the stator is faulty then there is no charge for this service but you pay for the repair instead.

then we can put all this to bed can't we?

Taffy

Last edited by Taffy; February 14th, 2017 at 01:10 AM.
Taffy is offline  
February 14th, 2017, 12:24 AM   #7
Junior Member
 
Joined: Jul 2016
From: Netherlands

Posts: 2
Thanks: 0

I Ride:
I will do it for free. Also have a few original stators and coils on stock.
Donpistoni is offline  
Reply

  Husaberg Forum > Husaberg Forum > Husaberg

Tags
1997, fe600e, husaberg, supermoto



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
For Sale: 1998 Husaberg Fe600E BigKev Classifieds 0 August 6th, 2016 05:54 PM
Husaberg fe600e Elliotisacoolguy New Users 7 April 6th, 2015 05:28 PM
Husaberg 400 FE 1997 no start elerepair Mechanical 19 March 29th, 2015 02:41 PM
Long time lurker, Inquiry about a Husaberg FE600E... PowerT Husaberg 11 July 31st, 2008 09:32 AM
Bearing on drive side on Husaberg FE600E -99 Macke Mechanical 0 July 7th, 2005 06:29 AM


Facebook Twitter Google+ RSS Feed