Husaberg
Go Back   Husaberg Forum > Husaberg Forum > Husaberg

Husaberg Husaberg Forum - Husaberg Motorcycle Forum


Thanks Tree1Thanks
  • 1 Post By husabutt
Reply
 
LinkBack Thread Tools Display Modes
August 13th, 2016, 12:12 PM   #1
Junior Member
 
Joined: Jun 2016
From: USA

Posts: 2
Thanks: 0

I Ride:
1999 Husaberg Fe400

Hello guys. I am in a little chaos here trying to find a water pump impeller for my bike. Does anyone know of any place that would have it or any other bikes that the parts would fit like ktm or Husqvarna? Any help would be appreciated.
Ajbarr11 is offline  
 
August 13th, 2016, 12:59 PM   #2
Moderator
 
ned37's Avatar
 
Joined: Dec 2004
From: back in cottonwood, az

Posts: 2,266
Thanks: 155

I Ride: 04 FE650E
the usa is a big place. where r u?
bozarth offroad service specialists (boss) in portland or, motoexotica in vacaville ca are two that come to mind
ned37 is offline  
August 14th, 2016, 08:36 AM   #3
Junior Member
 
Joined: Jun 2016
From: USA

Posts: 2
Thanks: 0

I Ride:
I'm in Indiana but I've called dealerships all over the place and haven't been able to find one.
Ajbarr11 is offline  
August 14th, 2016, 09:40 AM   #4
Senior Member
 
Joined: May 2016
From: Portugal

Posts: 110
Thanks: 22

I Ride: Husaber FE 400 E 1998, Suzuki DR 350 SE 1998, XT 350 1992
I think a rfs Ktm one can be trimmed to fit
webmonstro is online now  
August 14th, 2016, 10:39 AM   #5
Senior Member
 
husabutt's Avatar
 
Joined: Feb 2003
From: Escondido, Ca. USA

Posts: 2,961
Thanks: 266

I Ride: 2005 Fe450,2001 Fx470,1997 Fx600
Unfortunately the Husaberg part has been discontinued. A suitable replacement is the KTM impeller from a 01-07 250-525 RFS motor.

Part number 59035055144 $3.79

I used this impeller in my 97 600 (along with a KTM cam).

It is slightly larger in diameter. To shave it down I used a bolt about 2-3 inches long with a nut on the top and bottom of the impeller to hold it securely. Placed the bolt in a drill and spun the impeller against a piece of 80 grit sandpaper until a few millimeters was removed. The KTM impeller is ever so slightly thicker but it fits just fine.

I would order a few extras as the impeller can be rather difficult to remove and the plastic damages / deforms easily. Consider the impeller a one time use item. Also order a new alignment pin and circlip retainer. Circlips are always considered one time use so get a bag of them and don't open or stretch them any farther than you have to when installing them.

Thanks to Bushmechanic for posting a PDF of the 2007 KTM RFS Parts List.

Useful Crossover Parts - 2007 KTM 525 RFS Parts List

It is not only useful for the 04-08 Bergs but for the early ones as well. The KTM RFS motor was a continued development of the 89-2000 Husaberg motor. A few parts (very few) will interchange but expect modification to be required.
Attached Files
File Type: pdf 2007_525_EXC_Engine.pdf (2.12 MB, 2 views)
Thanks from Rainerio

Last edited by husabutt; August 14th, 2016 at 03:26 PM.
husabutt is offline  
Reply

  Husaberg Forum > Husaberg Forum > Husaberg

Tags
1999, fe400, husaberg



Search tags for this page
Click on a term to search for related topics.
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
locate exhaust valves and springs for 1999 fe400 raygamache Marketplace 1 June 29th, 2016 11:13 PM
To buy or not to buy 1999 FE400. Cannman Husaberg 5 August 29th, 2011 09:19 PM
Fe400 1999 elduro? chris_notts Fuel 5 February 7th, 2006 01:57 PM
1999 FE400 ediehl Husaberg 4 December 5th, 2005 06:55 PM
Husaberg FE 600 1999 6thgear Mechanical 10 March 26th, 2005 05:17 AM


Facebook Twitter Google+ RSS Feed