Go Back   Husaberg Forum > Husaberg Forum > Husaberg

Husaberg Husaberg Forum - Husaberg Motorcycle Forum

LinkBack Thread Tools Display Modes
December 1st, 2014, 12:34 PM   #1
Joined: Mar 2011
From: cali

Posts: 38
Thanks: 1

I Ride:
Heated grip wiring for 2011 FE570

Finally installing grip heaters (KTM branded ones) on my 2011 FE570
Have done some research on where to get power but there doesn't seem to be a consensus
Anyone willing to share their experience?
WantOne is offline  
December 1st, 2014, 01:05 PM   #2
Senior Member
Joined: Nov 2010
From: Salt Lake City, UT

Posts: 253
Thanks: 4

I Ride:
I don't remember where I picked up power, but I did research the wiring diagram and picked one of the fuses that is less critical. If the grips blow the fuse, I still want to be able to ride the bike. So pick a circuit that has less critical functionality - like lights.

On my kid's bike I hooked it to the headlight power and tell them not to run the headlight and the heaters at the same time. That bike doesn't have the power to drive both simultaneously like the Berg does. We don't ride at night, so it has worked out okay.
DeeG is offline  
December 1st, 2014, 01:40 PM   #3
Junior Member
Joined: Aug 2013
From: Surrey, UK

Posts: 11
Thanks: 0

I Ride: FE390
Heated grip wiring for 2011 FE570

On my Aus spec 390 (similar wiring) I used the blue/yellow feed to the indicator relay (the indicators had been removed as surplus to requirements)!
The heated grips have been great

Last edited by mudeevee; December 1st, 2014 at 01:41 PM. Reason: spelling
mudeevee is offline  
December 1st, 2014, 02:53 PM   #4
Joined: Mar 2011
From: cali

Posts: 38
Thanks: 1

I Ride:
Thanks DeeG.
Yes, the headlight power wire is currently my #1 choice but would hate to have it blow at night

Thank you as well Mudeevee
I found the yellow/blue wire but it looked a little wimpy
Guess I would rather lose the blinkers than headlight...
WantOne is offline  

  Husaberg Forum > Husaberg Forum > Husaberg

2011, fe570, grip, heated, wiring

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
2011 FE390 wiring help doolin64 Electrical 5 March 25th, 2014 07:15 AM
2011 NOT ENOUGH GRIP ON THE SEAT COVER scisneros Tech 5 February 23rd, 2011 06:26 PM
HELP! how to wire symtec heated grip elements jollygreen Electrical 9 November 25th, 2010 02:20 AM
Grip heater wiring/09 FE450 highlander Electrical 5 August 11th, 2009 12:48 AM
Heated Grip PWM Temp Controller SteveS Electrical 3 January 26th, 2008 07:05 AM

Facebook Twitter Google+ RSS Feed