Husaberg
Go Back   Husaberg Forum > Husaberg Forum > Husaberg

Husaberg Husaberg Forum - Husaberg Motorcycle Forum


Reply
 
LinkBack Thread Tools Display Modes
May 1st, 2005, 03:56 AM   #1
Member
 
oldberger's Avatar
 
Joined: Feb 2005
From: Lancashire

Posts: 75
Thanks: 0

I Ride:
Ready Racing Compflow Oil Filter

Anybody got one of these? http://store.readyracingstore.com/ktmrefi.html

If so are they as good as the Scott version?

oldberger
oldberger is offline  
 
May 1st, 2005, 04:35 AM   #2
Senior Member
 
Barry's Avatar
 
Joined: Nov 2001
From: Sodaville, Oregon, USA

Posts: 276
Thanks: 0

I Ride:
Looks like the same unit. Of course, that is why you were asking the question in the first place. The specifications of the Compflo state filtration down to 35 microns; and the Scotts specs state filtration down to 35 microns. So according to the stated filtration claims, they should be the same. Except for the pricing, and that will depend on the vendor you purchase one (or the other) from.

Here is the link to the Scott's data sheet:

http://www.scottsperformance.com/indexmain.html

I run the Scotts in a couple of my Bergs and like 'em. But I also run paper in the other two, also. Kinda like a comparison test of my own. The stainless are cheaper in the long run, and if the specs are to believed, they do a better job too.
Barry is offline  
May 1st, 2005, 04:48 AM   #3
Member
 
oldberger's Avatar
 
Joined: Feb 2005
From: Lancashire

Posts: 75
Thanks: 0

I Ride:
Seriously thinking of giving these a try. They seem very good value for £34, I can't find the Scott version for less than £50. Both filter to 35microns.

oldberger
oldberger is offline  
May 2nd, 2005, 01:42 PM   #4
Member
 
EuroEnduro's Avatar
 
Joined: Dec 2004
From: Kaysville, Utah

Posts: 80
Thanks: 0

I Ride:
Beware, I ordered one and the thing didnt fit. It seems that it was not assembled right. The end cap was on a angle which made it too long to get the cover on. Its been 4 weeks and still waiting for a good filter.

EuroEnduro
EuroEnduro is offline  
May 4th, 2005, 04:59 AM   #5
Senior Member
 
Joined: Oct 2003
From: Hampshire, UK

Posts: 188
Thanks: 0

I Ride:
The "only" difference is one is glued and the Scott's is welded.

I have a stainless JP filter and it is glued also, but I am yet to have any problems.
Supermoto_Husaberg is offline  
Reply

  Husaberg Forum > Husaberg Forum > Husaberg

Tags
compflow, filter, oil, racing, ready



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ready for the snow to go away! jtg_york Husaberg 13 February 25th, 2013 01:05 AM
New 2011 FE 390 pre filter & Can-AM filter mod question harikishan7 Husaberg 1 April 17th, 2012 07:09 PM
getting my fe 450 ready to ride. greenshovel0014 Husaberg 6 February 5th, 2011 01:51 PM
The 570 is ready 993sdad SuperMoto 41 March 7th, 2010 09:03 AM


Facebook Twitter Google+ RSS Feed