Husaberg
Go Back   Husaberg Forum > Husaberg Forum > Husaberg

Husaberg Husaberg Forum - Husaberg Motorcycle Forum


Reply
 
LinkBack Thread Tools Display Modes
October 12th, 2013, 03:41 AM   #1
Junior Member
 
Joined: Oct 2013
From: Co durham, England

Posts: 25
Thanks: 0

I Ride:
Husaberg fs650 2002 model rebuild

Hi has any on got a link to were I can get a rebuild manual for a 2002 husaberg FS 650 ?

Cheers
Dawson 2583 is offline  
 
October 12th, 2013, 08:46 AM   #2
Senior Member
 
plumbbob's Avatar
 
Joined: Aug 2008
From: England, Southampton

Posts: 755
Thanks: 157

I Ride: 02 650 StreetTracker, 92 K100 Special, 92 Triumph Cafe Racer.
Re: Husaberg fs650 2002 model rebuild

Hi Dawson,

There's a section on stripping and rebuilding in the owners docs on the top left of the home page.
plumbbob is offline  
October 12th, 2013, 09:17 AM   #3
Junior Member
 
Joined: Oct 2013
From: Co durham, England

Posts: 25
Thanks: 0

I Ride:
Re: Husaberg fs650 2002 model rebuild

Thanks ill have a look and print it out if I can
Much apresated all you guys are very help full much apresated

Goin be first time I've actually striped a 4 stroke down ive only striped 2 strokes down , got a lot ov friends that can help me so wish me luck
Dawson 2583 is offline  
October 12th, 2013, 09:32 AM   #4
Senior Member
 
plumbbob's Avatar
 
Joined: Aug 2008
From: England, Southampton

Posts: 755
Thanks: 157

I Ride: 02 650 StreetTracker, 92 K100 Special, 92 Triumph Cafe Racer.
Re: Husaberg fs650 2002 model rebuild

Apart from reading all the docs etc I took loads of pics as I stripped it down just as a reminder when it all goes back together.
Should be fine as long as you keep your mates coffee cups full!
plumbbob is offline  
October 12th, 2013, 09:46 AM   #5
Junior Member
 
Joined: Oct 2013
From: Co durham, England

Posts: 25
Thanks: 0

I Ride:
Re: Husaberg fs650 2002 model rebuild

Haha yea keep the brews coming ! And cheers for the photo ideas oll do that to !
Dawson 2583 is offline  
October 30th, 2013, 01:58 AM   #6
Junior Member
 
Joined: Oct 2013
From: Co durham, England

Posts: 25
Thanks: 0

I Ride:
Re: Husaberg fs650 2002 model rebuild

This husaberg is not goin beat me but might bankrupt me ! Got it all striped down took crank out to check bearing an replace then noticed the f**kin Conrod is bent ! Aaaaaaaaaaahhhhhhhhhhhh! Out else ?
Dawson 2583 is offline  
October 30th, 2013, 02:13 AM   #7
Senior Member
 
Joined: Aug 2011
From: Ontario, Canada

Posts: 916
Thanks: 95

I Ride: 01 Husaberg fe650
Re: Husaberg fs650 2002 model rebuild

That's unfortunate. Hopefully the crank is ok. I recently picked up a spare crank/rod/piston for my 01 off eBay ...mind you, I've been watching for something like this for 2 years. I like to have spares just in case. Good luck on the repair. How about some photos and a rebuild thread to help us pass the time.
Kayeffess is offline  
October 31st, 2013, 11:47 AM   #8
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,380
Thanks: 394

I Ride: Husaberg FE501e 2003
Re: Husaberg fs650 2002 model rebuild

where are you from Dawson?

if it is a little bent it can be straightened. I've done - or should I say - had it done before.

Taffy
Taffy is offline  
October 31st, 2013, 12:47 PM   #9
Junior Member
 
Joined: Oct 2013
From: Co durham, England

Posts: 25
Thanks: 0

I Ride:
Re: Husaberg fs650 2002 model rebuild

Hi taffy it well bent , I would put picture on but for some reason it won't let me put pics on here
I'm from County Durham , I spoke to you about my cylinder head getting fixed and a few other parts ,
Dawson 2583 is offline  
November 1st, 2013, 01:31 AM   #10
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,380
Thanks: 394

I Ride: Husaberg FE501e 2003
Re: Husaberg fs650 2002 model rebuild

rod kits are about 320gbp. then you have to have the crank split and pressed and straightened which is a 55-70gbp touch. then really, they have poor little ends and that ought to be done as well. I do a bush 15 quid cheaper than OEM at 25gbp. would you believe even I get them pressed in! they are so soft on the rim that they always burr and then I make an ugly repair so now I get that paid to be done as well!

these aren't cheap!it is nearly as cheap to find or buy a brand new 2005-8 pork chop crank at about 580gbp complete, then sell your old crank off. about evens I'd say and the satisfaction of knowing you have the better crank.

regards

Taffy
Taffy is offline  
Reply

  Husaberg Forum > Husaberg Forum > Husaberg

Tags
2002, fs650, husaberg, model, rebuild



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fitting current model KTM headlight & LED taillight to FS650 motofreak Electrical 8 September 9th, 2013 06:05 AM
Old Berg whines like a 2002 after rebuild Bergini Mechanical 9 November 2nd, 2012 04:19 PM
Fs650 not charging...? 2004 model Scarth Electrical 1 October 18th, 2011 08:33 PM
link to my 02 fs650 winter rebuild sledgehammer SuperMoto 1 February 7th, 2011 07:49 PM
TEMPLATES WANTED FOR 2002 Model faktor Husaberg 0 June 5th, 2004 03:14 PM


Facebook Twitter Google+ RSS Feed