Husaberg Forum

Husaberg Forum (http://husaberg.org/husaberg-forums.php)
-   Husaberg (http://husaberg.org/husaberg/)
-   -   Removing mid pipe on 570 (http://husaberg.org/husaberg/16911-removing-mid-pipe-570-a.html)

Electrified August 15th, 2013 05:21 PM

Removing mid pipe on 570
 
Trying to remove the mid pipe on my 11' 570s so I can get it ceramic coated but for the love of God please tell me I don't have to move or remove the motor! I have removed the head pip, have the bike completely stripped down, and removed the rear shock and still can't get it off.

Does anyone have some words of wisdom on how to get this thing off? :?

akshun August 15th, 2013 09:07 PM

Re: Removing mid pipe on 570
 
With the shock removed you should have enough room to remove the stock mid pipe.It is even tighter when you have a larger diameter pipe in there but it is still possible. Keep trying and good luck!

jon andersson August 15th, 2013 09:26 PM

Re: Removing mid pipe on 570
 
It helps to remove one of the engine brackets close to the mid pipe. You don't have to remove the engine.

akshun August 15th, 2013 09:31 PM

Re: Removing mid pipe on 570
 
Oh yeah, i thought the bracket would have been a given! That will make it a lot easier if you havent done so already!

Electrified August 16th, 2013 01:56 AM

Re: Removing mid pipe on 570
 
Thanks guys, I will try removing the engine bracket when I get home tonight and see how she goes. :wink:

Rensho August 16th, 2013 08:14 AM

Re: Removing mid pipe on 570
 
With the bracket and shock removed, I had little problem removing the midpipe. It is a tight puzzle piece for sure. It was tougher getting it back in after being wrapped, being thicker.

skred August 16th, 2013 12:56 PM

Re: Removing mid pipe on 570
 
Yea putting it back on is worse.Loosen the sub frame a couple of inches and you you wont scratch it .Skred

Electrified August 16th, 2013 05:12 PM

Re: Removing mid pipe on 570
 
It was easy once I removed the bracket. Now off to Performance Coatings and it should pop in just as easy. Thanks for the input. Seems easy now but when you haven't done it, it always helps to get advice from others that have already done it.

Thanks for the advice. :cheers:


All times are GMT -8. The time now is 12:37 PM.

Copyright © 2020 Husaberg Forum. All rights reserved.