Husaberg
Go Back   Husaberg Forum > Husaberg Forum > Husaberg

Husaberg Husaberg Forum - Husaberg Motorcycle Forum


Reply
 
LinkBack Thread Tools Display Modes
August 2nd, 2013, 09:41 AM   #1
Junior Member
 
Joined: Aug 2013
From:

Posts: 6
Thanks: 0

I Ride:
Husaberg Enforcer 600 just arrived,any info,parts etc?

Hello.


Just bought a Husaberg Enforcer 600,98 mod possible. the quad has a 01 650 engine fittet by the previous owner in sweden. an imported to norway in 2002 an parked in a garage until to i got it one week ago.

Engine parts are easy to get in norway but the rest is hopeless,the norwegian importer since 1994 barley had heard about the quad.

Anyone here that know anything about this bike?








Since it had stood stil for so long i did a engine service and when i opend the ignition cover it poured water out,the flywheel/rotor had corroded to pieces,a common problem i`m told.so i bought a complete new sem oem ignition with flywheel/rotor and the stator that fits inside the ignition cover. boltet it all together but still no spark. i get a little weak spark with full force on the kickstart at the bottom of the stroke.anyone had the same problem?

Just sold my 04 fs 650 so can`t wait to feel the power again.

Sorry for bad english

Thanks for answers.
HsbEnfrc is offline  
 
August 2nd, 2013, 01:35 PM   #2
Site Founder
 
schwim's Avatar
 
Joined: Sep 1998
From: NC, US

Posts: 3,145
Thanks: 49

I Ride: Cannondale Scalpel
Re: Husaberg Enforcer 600 just arrived,any info,parts etc?

Heya

What a blast from the past! When we had some members with the quads, it was hard to find anyone with access to parts. It's been about 5 years since any active members have discussed the quads at any length so it's even worse of a hunt than it was then.

I very well might be wrong(my memory isn't the best), but I thought I read that a single person purchased all the stock of quad parts from Husaberg when they decided they didn't want to be a quad builder. I'm having problems finding the threads mentioning this, but maybe someone will pipe up that remembers better than I.
schwim is offline  
August 4th, 2013, 04:22 AM   #3
Senior Member
 
Joined: Mar 2012
From: South Australia

Posts: 235
Thanks: 5

I Ride:
Re: Husaberg Enforcer 600 just arrived,any info,parts etc?

Sorry guys, i cant help you at all. I just had to voice my surprise and delight that there is such a thing as a berg quad! Im not a quad guy but i could definitely make an exception for one of those!
akshun is offline  
August 4th, 2013, 04:57 AM   #4
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 14,468
Thanks: 246

I Ride:
Re: Husaberg Enforcer 600 just arrived,any info,parts etc?

any new SEM can actually corrode on the shelf as the SEM factory disappeared in 2008.

suggest that you check red to black and that will be way less than the 2,700 ohms that you need probably.

don't throw the old flywheel wither....people need these things! there used to be a member here with two of them....

Taffy
Taffy is offline  
August 4th, 2013, 12:58 PM   #5
Junior Member
 
Joined: Aug 2013
From:

Posts: 6
Thanks: 0

I Ride:
Re: Husaberg Enforcer 600 just arrived,any info,parts etc?

Thanks for answers.

I mesured the spools to day 2,915 ohms on the new and 2,928 ohms on the old.so i think the problem has to be another place. the wires to the cdi/coil unit is ok. is there a way to check the cdi/coil unit?

I dont trow anything away. i have 2 complete rotors/flywheels with workings stators from previous bikes if anyone want them for free, the rotors have minor cracks and corrosion on the magnets.
HsbEnfrc is offline  
August 5th, 2013, 04:58 AM   #6
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 14,468
Thanks: 246

I Ride:
Re: Husaberg Enforcer 600 just arrived,any info,parts etc?

I could do with those flywheels fella! I'm sure I can find you the postage!

the coil can't be tested except on a working bike. you said you had a weak spark so that counts the coil out. the coil either works or it doesn't.

I don't think your stator is 'out of the woods' yet!

a black plug will give a very poor spark. suggest that you remove the plug cap, hold 10mm from head and see if the spark can jump the gap?

regards

Taffy
Taffy is offline  
August 5th, 2013, 02:59 PM   #7
Senior Member
 
Joined: Dec 2007
From: Doncaster, South Yorkshire

Posts: 183
Thanks: 1

I Ride:
Re: Husaberg Enforcer 600 just arrived,any info,parts etc?

Originally Posted by HsbEnfrc

Anyone here that know anything about this bike?



Yes - its awesom
philis is offline  
August 5th, 2013, 09:27 PM   #8
Senior Member
 
Joined: Mar 2003
From: Kassel - Germany

Posts: 342
Thanks: 0

I Ride:
Re: Husaberg Enforcer 600 just arrived,any info,parts etc?

A few quick links:

Forum search for enforcer

User Profile of ENFORCER4
User Profile of motoxmaniac
They own/owned one of these, but it's a while since they last visited the site...

Hope this helps...
Maddel is offline  
August 6th, 2013, 05:31 AM   #9
Senior Member
 
Joined: Jun 2001
From: Troutdale, Oregon USA 2005 FE550e

Posts: 1,268
Thanks: 10

I Ride:
Re: Husaberg Enforcer 600 just arrived,any info,parts etc?

Member ENFORCER4 has a decent gallery.

http://www.husaberg.org/gallery/v/Members/ENFORCER4/
logjump is offline  
August 6th, 2013, 12:39 PM   #10
Junior Member
 
Joined: Aug 2013
From:

Posts: 6
Thanks: 0

I Ride:
Re: Husaberg Enforcer 600 just arrived,any info,parts etc?

Thanks for the answers.

no luck with the spark problem yet. it can`t jump the 10mm gap from lead to head.has to go down to about 5mm with out the sparkplug in. with the plug in i can`t kick it fast enough to produce the spark. Bit tired of the Sem ignition now,maybe it`s time for a 04 650 engine soon.
HsbEnfrc is offline  
Reply

  Husaberg Forum > Husaberg Forum > Husaberg

Tags
600, arrived, enforcer, husaberg, info, parts



Search tags for this page
Click on a term to search for related topics.
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
1992 FE 350 I just picked one up. I need info and parts Ossaguy Husaberg 3 November 4th, 2011 06:38 AM
Where to sell and price a Enforcer quad zgoo Husaberg 3 May 15th, 2010 05:08 PM
KTM Parts offering limited Husaberg parts and bikes. Hair Marketplace 35 November 15th, 2009 01:18 AM
Husaberg parts,parts books and pricing nsman Mechanical 1 February 24th, 2007 02:47 PM
Dell Orto parts and info FirstEliminator Fuel 2 October 11th, 2005 01:00 AM


Facebook Twitter Google+ RSS Feed