Husaberg
Go Back   Husaberg Forum > Husaberg Forum > Husaberg

Husaberg Husaberg Forum - Husaberg Motorcycle Forum


Reply
 
LinkBack Thread Tools Display Modes
December 10th, 2013, 01:58 AM   #21
Junior Member
 
Joined: Dec 2013
From:

Posts: 7
Thanks: 0

I Ride:
Re: Husaberg Enforcer 600 just arrived,any info,parts etc?

Hi i have exactly the same quad......my shim broke of and went in to the timing gear and messed up the head....unfortunately im in cape town south Africa.....i had to take the old timing gear and head in for engineering.....

my starter doesn't work i think it needs to be rewired. kick-starting is a b**ch
nico is offline  
 
February 10th, 2014, 11:05 PM   #22
Junior Member
 
Joined: Feb 2014
From: Australia

Posts: 5
Thanks: 0

I Ride:
Re: Husaberg Enforcer 600 just arrived,any info,parts etc?

Hi Guys,
I also have a enforcer quad, It's a 600E .It has done very little work as it sat in pallet racking for over 7 years that I know of and I've owned it for about 3 years.It has been set up for dirt track racing ,so is lowered and has slicks to run on oil tracks. I thought I'd do the right thing and drop it to a workshop for a tune and suspension overhaul and I received a phone call 6 weeks later with an apology that they cannot get it to run again.I got it home and found the problem but while it was in the workshop cranking the starter to death it has worn out the starter drive gear inside the cases so no longer has the e-start. I'm trying to find the parts to fix it otherwise I'll need to fit a 650 engine also.The reason for this is that the kickstarter hits the frame and has very limited travel.I have ground down an old kick start off my old 501 but it is not ideal.The quad was near unrideable it has so much power to put through those big fat tyres which just throw roost to the horizon.
samh is offline  
February 11th, 2014, 05:49 AM   #23
Senior Member
 
zaga's Avatar
 
Joined: Mar 2009
From: Portugal

Posts: 1,254
Thanks: 152

I Ride: KTM 300 XC
Re: Husaberg Enforcer 600 just arrived,any info,parts etc?

Hi

Don't know if this will work, but the newer kicks have a different shape, I have one of those in my 02, maybe with that different shape (not strait) it could clear the frame ???

Just a thought

As from what you described you will need the counterbalance were the Sprague works (maybe) and that other gear that you have access from the outside (it has a cover). That is what is connecting the starter to the engine. (maybe ebay, had one but sold it )


ZAGA
zaga is offline  
February 12th, 2014, 12:21 PM   #24
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 14,551
Thanks: 255

I Ride:
Re: Husaberg Enforcer 600 just arrived,any info,parts etc?

I'm looking for that gear that you can fit from the outside Zaga! so if anyone here has one please let me know?

the kickstart can be cured by doing the sledge mod which I also sell ready for that year for 20GBP. if the idiots have made the starter slip then this can't be cured without a strip. again, I have a cure for this too! I'd stick to the 600 - very light and a 3 x world 500MX title winner more or less!

regards

Taffy
Taffy is offline  
February 12th, 2014, 02:11 PM   #25
Senior Member
 
zaga's Avatar
 
Joined: Mar 2009
From: Portugal

Posts: 1,254
Thanks: 152

I Ride: KTM 300 XC
Re: Husaberg Enforcer 600 just arrived,any info,parts etc?

Here it is

[attachment=0:590eg2pk]Gear_that_you_can_fit_from_the_outside.jpg[/attachment:590eg2pk]

It's not a bad name I think the berg guys should have used this name in the parts manual


ZAGA
Attached Thumbnails
Husaberg Enforcer 600 just arrived,any info,parts etc?-gear_that_you_can_fit_from_the_outside.jpg  
zaga is offline  
February 12th, 2014, 02:21 PM   #26
Senior Member
 
tourist's Avatar
 
Joined: Nov 2012
From: Iceland

Posts: 2,017
Thanks: 577

I Ride: 1 Berg, 1 Zook
Re: Husaberg Enforcer 600 just arrived,any info,parts etc?

haha!
tourist is online now  
February 18th, 2014, 03:57 AM   #27
Junior Member
 
Joined: Feb 2014
From: Australia

Posts: 5
Thanks: 0

I Ride:
Re: Husaberg Enforcer 600 just arrived,any info,parts etc?

Hey guys, I have the gear which is accessible from the outside - no problems there, I'm certain it's the sprague deep inside ! - I have fitted a new sledge and should have the later model kickstart within the week so will let you know if it clears the frame.
samh is offline  
January 6th, 2017, 04:31 AM   #28
Junior Member
 
Joined: Jan 2017
From: Gippsland

Posts: 4
Thanks: 0

I Ride:
I'd thought I'd reply to this thread and see if you still have this quad and find how it's going?
Simonappleby is offline  
Reply

  Husaberg Forum > Husaberg Forum > Husaberg

Tags
600, arrived, enforcer, husaberg, info, parts



Search tags for this page
Click on a term to search for related topics.
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
1992 FE 350 I just picked one up. I need info and parts Ossaguy Husaberg 3 November 4th, 2011 06:38 AM
Where to sell and price a Enforcer quad zgoo Husaberg 3 May 15th, 2010 05:08 PM
KTM Parts offering limited Husaberg parts and bikes. Hair Marketplace 35 November 15th, 2009 01:18 AM
Husaberg parts,parts books and pricing nsman Mechanical 1 February 24th, 2007 02:47 PM
Dell Orto parts and info FirstEliminator Fuel 2 October 11th, 2005 01:00 AM


Facebook Twitter Google+ RSS Feed