Husaberg
Go Back   Husaberg Forum > Husaberg Forum > Husaberg

Husaberg Husaberg Forum - Husaberg Motorcycle Forum


Reply
 
LinkBack Thread Tools Display Modes
June 21st, 2013, 12:03 AM   #1
Junior Member
 
Joined: Apr 2011
From: shropshire

Posts: 9
Thanks: 0

I Ride:
Husaberg 390 2010

I have taken the leap and gone blue and bought a 390 2011 , anything I should or do ?? or are they just fine as they are..
Also the previous owner lowered the seat , anybody got a normal seat they want to sell or swap for a lowered one.
Knobby is offline  
 
June 21st, 2013, 07:08 AM   #2
Member
 
Joined: May 2011
From: Uk

Posts: 89
Thanks: 0

I Ride:
Re: Husaberg 390 2010

They are really solid from stock so I would ride it and enjoy it! Change oil regularly, I do every 10 hours and filter every third change. If engine starts to sound rattly it could be he cam chain tensioner, which failed on some early ones. Some good after market ones from DJH Sports and Dirt tricks.

Find a good dealer on husabergs and they will offer good advice.

Where are you located?
kipper is offline  
June 21st, 2013, 08:30 AM   #3
Junior Member
 
Joined: Apr 2011
From: shropshire

Posts: 9
Thanks: 0

I Ride:
Re: Husaberg 390 2010

Shropshire , telford uk
Knobby is offline  
June 21st, 2013, 10:34 PM   #4
Senior Member
 
Joined: Aug 2010
From: North Wales

Posts: 133
Thanks: 1

I Ride:
Re: Husaberg 390 2010

Welcome.
I think it would be a good idea if you fitted a restrictor until you get used to it.
It is a big step up from the orange shi+ that you have been riding before

Enjoy
EddieFE is offline  
June 22nd, 2013, 09:47 AM   #5
Senior Member
 
Joined: Aug 2012
From: Lake Tahoe

Posts: 222
Thanks: 17

I Ride:
Re: Husaberg 390 2010

The seats on these have almost no padding, so if it was cut, it'd be horrible. They sell a low/std/high version. My buddy has the high and says it is pretty good. I had the std and it sucked, too hard. I drilled 1" holes from the plastic side and that made the pan and foam softer.

I don't know if the UK bikes are corked up from the factory, but the US bikes are horribly so. We have to remove smog stuff, and cut restrictors from the muffler, or better yet get a new muffler. Then we install the 'competition' map to get some fuel back into the system.
Rensho is offline  
June 22nd, 2013, 01:32 PM   #6
Junior Member
 
Joined: Sep 2011
From: Norway

Posts: 28
Thanks: 0

I Ride:
Re: Husaberg 390 2010

Originally Posted by Knobby
I have taken the leap and gone blue and bought a 390 2011 , anything I should or do ?? or are they just fine as they are..
Also the previous owner lowered the seat , anybody got a normal seat they want to sell or swap for a lowered one.
If you look at ebay there are a seat for sale.
http://www.ebay.com/itm/Used-Husaberg-T ... 79&vxp=mtr

Congratulation with the new blue!
Glenn71 is offline  
June 22nd, 2013, 02:09 PM   #7
Member
 
Joined: May 2011
From: Uk

Posts: 89
Thanks: 0

I Ride:
Re: Husaberg 390 2010

If you contact the main dealer in uk, Midwest based in melksham, they should sort you out. I had the standard and it was fine, also had short and it was good together used to the bike initial but preferred the standard. I am 5' 9 with a 29 inch inside leg if that helps.

Did you buy the one on eBay? If so a new seat will do wonders for it!
kipper is offline  
June 22nd, 2013, 02:12 PM   #8
Junior Member
 
Joined: Apr 2011
From: shropshire

Posts: 9
Thanks: 0

I Ride:
Re: Husaberg 390 2010

Cheers lads bit of fettling today revalved front and rear suspenders and shortened the rear shock , new oils and tyres , and I got a new seat today .
So I have a spare cut down seat if anybody wants one
Knobby is offline  
Reply

  Husaberg Forum > Husaberg Forum > Husaberg

Tags
2010, 390, husaberg



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
2010 fx 450 - new to husaberg jgilbert164 Husaberg 1 February 7th, 2013 10:16 PM
Husaberg 570 fs 2010 Help!!! patrick666 Husaberg 3 March 9th, 2012 11:29 AM
2010 Husaberg FE 390 dhub Husaberg 4 October 14th, 2010 03:44 AM
Husaberg sm 570 2010 crfke Mechanical 4 September 9th, 2009 10:43 PM
2010 Husaberg video ossaman Electrical 3 July 2nd, 2009 11:07 PM


Facebook Twitter Google+ RSS Feed