Go Back   Husaberg Forum > Husaberg Forum > Husaberg

Husaberg Husaberg Forum - Husaberg Motorcycle Forum

LinkBack Thread Tools Display Modes
May 11th, 2013, 04:11 PM   #1
Senior Member
Joined: Jan 2009
From: Brisbane, Australia

Posts: 236
Thanks: 15

I Ride: 2012 FE 570, 2004 950 Adventure, 99 YZF 400, 1982 FXR Harley Davidson
Gear shift lever 04 550

Just wanted to ask if anyone has found a good after market shift lever that'll fit my 04' 550. May need to go back to the standard unit. I got one of Taffy's as a spare and when it's fitted it seems the spline is a little out of synq. The head of the lever is either somewhat to high or somewhat to low. I'm not sure if it's changed in desing but the one I bought prior was the same and fitted on fine and in the right position.

From what I can see RFK and hammerhead brand are all to suit the newer models, any ideas for other brands..? or is it OEM to save the day...?

520pilot is offline  
May 11th, 2013, 05:39 PM   #2
Senior Member
Joined: Feb 2009
From: Birdwood South Australia

Posts: 274
Thanks: 15

I Ride: 70 degree fe450 2012 & Aprilia Dorsoduro
Re: Gear shift lever 04 550

Hammerhead tips for Ktm measure the same thickness and you can get different offsets i remember looking into it a while ago. The are expensive around 40aus each tip that includes c-clip and pin.
birdwoodburg is offline  
June 12th, 2013, 04:44 AM   #3
Senior Member
Joined: Apr 2007
From: Orange, New South Wales, Australia

Posts: 377
Thanks: 66

I Ride: Husaberg
Re: Gear shift lever 04 550

MCS , Motor Cycle Specialties in QLD have an aftermarket lever that fits good and lasts, its not cheap shit alloy. I have one on one of my bikes and its going the distance. I may have another here somewhere in stock but most bike shops deal with MCS. i can order in for half the price of genuine.
John Orangeberg
ORANGEBERG is offline  
June 12th, 2013, 10:38 PM   #4
Joined: Dec 2011
From: Sydney, Australia

Posts: 73
Thanks: 2

I Ride:
Re: Gear shift lever 04 550

I'd get in on that john. I need one too!
jimmythehat is offline  

  Husaberg Forum > Husaberg Forum > Husaberg

550, gear, lever, shift

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Aftermarket shift lever? Dieselfool Mechanical 8 October 5th, 2012 03:05 AM
Shift lever Electrified Tech 5 November 25th, 2011 06:55 PM
2010 FE390. Oil leaking from base of shift lever MikeAdamson Mechanical 1 May 13th, 2011 12:41 PM
Will not shift to 3rd gear gvnick Mechanical 1 June 8th, 2010 03:24 PM
Replacement gear/shift lever rubba Mechanical 5 August 13th, 2008 08:09 PM

Facebook Twitter Google+ RSS Feed