Husaberg
Go Back   Husaberg Forum > Husaberg Forum > Husaberg

Husaberg Husaberg Forum - Husaberg Motorcycle Forum


Reply
 
LinkBack Thread Tools Display Modes
June 11th, 2011, 04:44 AM   #1
Senior Member
 
Joined: Nov 2010
From: montreal,Canada

Posts: 235
Thanks: 17

I Ride: 2005 fs650
sand in frame

well today I removed my air filter to clean it and found that on the inside of the frame there is some sand and oil. the oil would be fromt the breather tube ( which I am going to reroute) but how would the sand get it. I put water proof grease on the bottom of the airfilter surface where it sits on the frame, and no sand there only in the frame. the ventury of the carb is starting to look like it's getting sandblasted. my bike is a 2005 fs 650e it gets used 90% on road and 10% off road. to be exact I have used it 3 times at a mx track since I bought it this winter. is there an air inlet at the steering head!
helithumper is offline  
 
June 11th, 2011, 04:52 PM   #2
Senior Member
 
Joined: Nov 2008
From: Brisbane, Australia.

Posts: 140
Thanks: 0

I Ride:
Re: sand in frame

Maybe the engine breather hose/boot isn't sitting on the frame backbone properly and its sucking unfiltered air from there. Or its split. It should be the only other way air could get into the backbone/airbox if the airfilter is seated properly. Pull off the tank and see what you can see........
BoneGraft is offline  
Reply

  Husaberg Forum > Husaberg Forum > Husaberg

Tags
frame, sand



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Michigan Sand toopilot Suspension 1 September 29th, 2013 08:31 AM
570 in the sand video moparmiller Husaberg 8 July 7th, 2011 06:36 PM
Holy Sand toopilot Suspension 4 June 13th, 2011 06:45 AM
Preparing for salt and sand riding... maDDtraPPer Husaberg 13 December 30th, 2008 04:24 PM
Kings Sand Rib Front Tire GoldenBoy Wheels and Tires 1 October 17th, 2008 01:18 PM


Facebook Twitter Google+ RSS Feed