Husaberg Forum

Husaberg Forum (
-   Husaberg (
-   -   Throttle mechanism (

faktor February 13th, 2005 10:29 PM

Throttle mechanism
Chasing a throttle mechanism mine broke where cable comes into the handpiece before the throttle tube etc. Anyone know what I can use apart from original. Any help would be great :P

Taffy February 13th, 2005 11:25 PM

venhill in the uk make them and they have a web site somewhere.

check for an aussie importer.



faktor February 14th, 2005 12:34 AM

I broke the cast aluminium boot right before the brass piece where cable comes in. Hope that makes it clearer. I dont need the brass end thats on the cable i need the throttle assembly.

steve February 14th, 2005 04:28 PM

Try Ballards. They used to do a Domino, I think, throttle that they sold with a Dellorto as an XR600 hotup.

BundyBear February 14th, 2005 09:23 PM

What year model? OEM for the early ones were Domino. If you get stuck I might have a spare with a stripped clamp bolt thread in the box of bits that came with mine.

faktor February 14th, 2005 11:28 PM

that sounds promising i will let you know how i go it is a 2002

BundyBear February 15th, 2005 03:19 PM

Faktor - Sorry, but the one I have probably won't do. It looks different to the one in the 2002 parts manual. It uses a slide for the 90 degree bend in the cable as it leaves the twistgrip rather than a wheel. The parts list says they changed in '99.

All times are GMT -8. The time now is 12:18 PM.

Copyright © 2019 Husaberg Forum. All rights reserved.