Husaberg
Go Back   Husaberg Forum > Husaberg Forum > Husaberg

Husaberg Husaberg Forum - Husaberg Motorcycle Forum


Reply
 
LinkBack Thread Tools Display Modes
June 14th, 2010, 04:12 PM   #11
Senior Member
 
tazer's Avatar
 
Joined: Apr 2009
From: Banjup Western Australia

Posts: 212
Thanks: 0

I Ride: 2009 FE570
Re: Pictures of coated Pipe.

Originally Posted by cypher
what is it coated with?

Cermakrome?
We are still wating
tazer is offline  
 
June 14th, 2010, 04:19 PM   #12
Senior Member
 
Joined: Oct 2009
From: Virginia Beach, VA

Posts: 261
Thanks: 0

I Ride:
Re: Pictures of coated Pipe.

It's just coated with ceramic. That is the color of ceramic coating this company uses.
CrazyTed is offline  
June 16th, 2010, 05:30 PM   #13
Senior Member
 
Joined: Oct 2009
From: Virginia Beach, VA

Posts: 261
Thanks: 0

I Ride:
Re: Pictures of coated Pipe.

Well, believe I have found the problem. I've been on the phone with some contacts from Husaberg. I had previously checked the wiring harness as thoroughly as I could. After speaking to them, I was advised several areas to pay special attention to on the harness. In the area under the tank on top of the engine cases I saw the metal had been rubbed shiny. I looked really closely at the harness with a bright flashlight and found a very, very small slice. After opening up the harness, I found the blue/silver wire had been grounding on the engine case.

View from the top down in the area where the loom rubbed.


You can see the rub marks on the top of the engine cases


View of the micro slit on the wiring harness



If you look close, you can see the wiring insulation is discolored and you can see the bare wire.
CrazyTed is offline  
Reply

  Husaberg Forum > Husaberg Forum > Husaberg

Tags
coated, pictures, pipe



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
New Liners coated or uncoated ? anthonys4691 Mechanical 1 July 21st, 2013 07:58 AM
powder coated parts MrX Husaberg 8 March 4th, 2013 04:32 AM
Ceramic coated header & mid pipe - FS570 Torque Monster Exhausts 13 December 10th, 2012 08:41 PM
Coated piston? Neil_E. Mechanical 2 May 25th, 2008 07:00 PM
Exhaust pipe qualities, particularly header pipe Simon Husaberg 17 January 23rd, 2005 08:29 PM


Facebook Twitter Google+ RSS Feed