Go Back   Husaberg Forum > Husaberg Forum > Husaberg

Husaberg Husaberg Forum - Husaberg Motorcycle Forum

LinkBack Thread Tools Display Modes
December 11th, 2004, 04:05 AM   #1
Ammo's Avatar
Joined: Oct 2004
From: Southwest Corner of Iowa

Posts: 39
Thanks: 0

I Ride:
loosing coolant

the other day while out blasting some back roads, I was normally clipping along in top gear at a quick pace.

I started noticing water on top of the tank on the throttle side.

Didn't think too much about it as I had gone through a couple of puddles.

Once I got home I noticed the entire throttle side of the bike was wet as was my leg.

it was engine coolant.

appears to be coming from the cap area.

anyway to tell if the cap it defective or worn out?

it was on properly and there isn't any noticable damage to the rediator in that area.

wheres the best place to order parts from and what should I expect to pay for a new cap?

any other thoughts on why this would happen if it wasn't due to a faulty cap?
Ammo is offline  
December 11th, 2004, 04:13 AM   #2
Senior Member
Joined: May 2004

Posts: 302
Thanks: 1

I Ride:
zip down to your local bike shop they can pressure test your cooling system for you and test your radiator cap for sealing and holding pressure
best place for you would be motoxotica they sponsor this site you will see there advertup top on the main page

cheers doug
44014 is offline  
December 11th, 2004, 07:16 AM   #3
berger's Avatar
Joined: Apr 2002
From: Phoenix Arizona

Posts: 3,150
Thanks: 9

I Ride: 2010 FX450
You may try replacing the cap and mounting an overflow bottle. That will be one of my many Berg projects today.
berger is offline  

  Husaberg Forum > Husaberg Forum > Husaberg

coolant, loosing

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
loosing engine oil 2011 husaberg 570 titan Mechanical 3 August 10th, 2012 09:34 PM
oil breather, loosing oil RejekzNoodles Mechanical 29 January 22nd, 2012 11:47 AM
190 Deg c Coolant Sutto's Cooling Systems 5 September 3rd, 2009 02:42 AM
coolant in the oil! Kieran Tech 8 January 29th, 2009 01:52 AM
Screws/nuts going loose and loosing them... Proemer Mechanical 1 March 6th, 2007 02:12 PM

Facebook Twitter Google+ RSS Feed