Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Fuel

Fuel Fuel Delivery


Reply
 
LinkBack Thread Tools Display Modes
September 4th, 2008, 04:41 AM   #1
Senior Member
 
Joined: Nov 2003
From: The Netherlands

Posts: 108
Thanks: 0

I Ride:
Stalling engine 501

Sometimes my engine (501 / 03) stalls when opening the throttle from low revs. When the revs are a little bit higher there is no hesitation at all. This is fairly new, I never changed anything on the carb settings; simply because I had no reason to do so. What do you guy's recon? It always starts, cold or warm, on the first push of the magic button, and the ride is still fantastic with loads of power!
Cheesehead is offline  
 
September 4th, 2008, 05:43 AM   #2
kez
Senior Member
 
Joined: Sep 2004
From: Sunny Surrey,England

Posts: 312
Thanks: 0

I Ride:
RE: Stalling engine 501

What carb? Dellorto or FCR? that would help as each suffers from their own quirks.
kez is offline  
September 4th, 2008, 06:01 AM   #3
Senior Member
 
Joined: Nov 2003
From: The Netherlands

Posts: 108
Thanks: 0

I Ride:
Yep, forgot to mention that; it's a Dellorto with the famous SEM ignition...
Cheesehead is offline  
September 4th, 2008, 07:11 AM   #4
Moderator
 
berger's Avatar
 
Joined: Apr 2002
From: Phoenix Arizona

Posts: 3,150
Thanks: 9

I Ride: 2010 FX450
Worn needle and needle jet??
berger is offline  
September 4th, 2008, 09:24 AM   #5
Moderator
 
ned37's Avatar
 
Joined: Dec 2004
From: back in cottonwood, az

Posts: 2,313
Thanks: 195

I Ride: '08 HUSKY te610
like berger said.
ned37 is offline  
September 4th, 2008, 09:53 AM   #6
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,539
Thanks: 417

I Ride: Husaberg FE501e 2003
what is your pilot jet dutch?

i used to get over it by raising the needle by a clip.if it has suddenly happened then this is a good way to get over it.

have you ever strobed your ignition timing with the new mark?

regards

Taffy
Taffy is offline  
September 4th, 2008, 10:39 PM   #7
Senior Member
 
Joined: Nov 2003
From: The Netherlands

Posts: 108
Thanks: 0

I Ride:
Hmmmmm, seems like I have something to do this weekend... Yes it could be a worn needle and needle jet, my bike has about 14000 km's on it without any change on the carb. I'll have a good look at that.
@ Taffy, I'll have a look at the height of the needle, and no; I didn't strobe anything.

Thanks for the input, I'll give a report on Monday!

Have a great weekend!
Cheesehead is offline  
September 4th, 2008, 10:41 PM   #8
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,539
Thanks: 417

I Ride: Husaberg FE501e 2003
you have a PM
Taffy is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Fuel

Tags
501, engine, stalling



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Stalling help. MrX Mechanical 16 April 15th, 2013 11:32 PM
nothing but stalling ............HELP Braddenning Fuel 1 November 16th, 2012 06:32 AM
390 stalling a lot ThumpDrunk Husaberg 4 January 3rd, 2011 04:02 AM
HELP please: 09 engine stalling after 30 mins or so JW Mechanical 10 May 24th, 2010 11:50 PM
Stalling BelgiqueBasterd Husaberg 10 November 3rd, 2009 03:29 PM


Facebook Twitter Google+ RSS Feed