Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Fuel

Fuel Fuel Delivery


Reply
 
LinkBack Thread Tools Display Modes
June 24th, 2008, 05:23 PM   #1
Junior Member
 
Joined: Jun 2008
From:

Posts: 7
Thanks: 0

I Ride:
In need of floats for my Dellorto PHM 40 for 1999 FE600E

I ordered floats for my FE600E 3 months ago Husaberg part #ph25016801 and they are on back order until who know when. Dellortos part # is 15760.3 float single 4g. Any idea where I can track this part down. I would greatly appreciate it.

Tom
toolmantom is offline  
 
June 24th, 2008, 05:30 PM   #2
Member
 
Joined: Aug 2005
From: Rhode Island

Posts: 55
Thanks: 0

I Ride:
Not sure where you are from, but I usually order my Dellorto parts from http://www.herdan.com/dellorto/ So far, he has always had every part in stock.
Mogly406 is offline  
June 24th, 2008, 08:04 PM   #3
Senior Member
 
husabutt's Avatar
 
Joined: Feb 2003
From: Escondido, Ca. USA

Posts: 3,011
Thanks: 289

I Ride: 2005 Fe450,2001 Fx470,1997 Fx600
also:

http://www.motorcyclecarbs.com/Dello...etors_C482.cfm

On the PBM 40 the floats can come set up together or independent.

Since you are working on the carb you may want to check and see if yours was fitted with a "idle emulsion tube" aka CDI jet. Part #4 on the diagram url below. This tube goes under the pilot or idle jet as Dellorto calls them. Members who have installed the optional emulsion tube have reported much easier starting where previously starting was very difficult. Some carbs came with them some did not.



http://www.motorcyclecarbs.com/dello...s/PHMframe.htm



Diagram borrowed from KEZ.

Most of the starting problems due to lack of the emulsion tube have been on the smaller bikes, 400 & 470. I don't know if 600's would benefit but probably worth a try for about $7.00.
husabutt is offline  
June 24th, 2008, 09:02 PM   #4
Member
 
Joined: Apr 2007
From: Lafayette, CA USA

Posts: 90
Thanks: 0

I Ride:
I found this place to have most the parts and fast shipping
http://www.bevelheaven.com/stuff-for-sale-dellorto.htm
if your on the west coast of US
Husahoff is offline  
June 25th, 2008, 12:39 AM   #5
Senior Member
 
Joined: Jan 2007
From: Central Coast NSW Australia

Posts: 390
Thanks: 0

I Ride:
Hey toolmantom
Try www.dellorto.co.uk they have heaps of parts for all types and mail around the globe.
Coastie is offline  
June 25th, 2008, 07:57 AM   #6
Junior Member
 
jack2u98's Avatar
 
Joined: Oct 2006
From: SoCal

Posts: 19
Thanks: 0

I Ride:
Another source for Del' Lorto parts in the UK (also serv. U.S. & presumably worldwide) is BeedSpeed (see link). Good pricing and very prompt for the parts I needed.


http://beedspeed.com/carburettor-kits-a ... e401cd47a1
jack2u98 is offline  
June 25th, 2008, 08:00 AM   #7
Junior Member
 
Joined: Jun 2008
From:

Posts: 7
Thanks: 0

I Ride:
Thank you everyone for all your replies. Dellorto.co.uk has them in stock and they are shipping them out today. HOOOOORAY!!!!!!!!!!!!! I wish I thought of asking here months ago. Well now I know. You guys are the best.

Thanks again.

I ll check to see if I have the Idle emulsion tube when I am in there.
toolmantom is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Fuel

Tags
1999, dellorto, fe600e, floats, phm



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Value of a 1999 FE600E ? Esavetsky Husaberg 2 May 19th, 2010 05:56 PM
Will 1999 fc 501 wheels fit on a 1999 fe600e? toolmantom Wheels and Tires 2 July 8th, 2008 11:03 PM
Are 1999 Fc 501 wheels and 1999 Fe600 wheels interchangeable toolmantom Husaberg 0 July 8th, 2008 06:17 PM
1999 Fe600e electrical failure. Wyatt Electrical 11 October 10th, 2005 08:10 AM
jetting fe600e (96) petbro1 Mechanical 2 April 5th, 2005 09:31 PM


Facebook Twitter Google+ RSS Feed