Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Fuel

Fuel Fuel Delivery


Reply
 
LinkBack Thread Tools Display Modes
November 26th, 2007, 09:17 AM   #1
Senior Member
 
Joined: Sep 2006
From: Hayle Cornwall

Posts: 987
Thanks: 22

I Ride:
inlet manifold

Hi All,

Came across this on ebay not seen or heard of this before anybody come across it before and does it do what it says on the box.
It looks just like baffle of some description and wouldn't take long to modify the original stack.


http://cgi.ebay.com/ebaymotors/Scary-fa ... enameZWDVW

Regards

Sparks.
sparks is offline  
 
November 26th, 2007, 09:22 AM   #2
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,615
Thanks: 441

I Ride: Husaberg FE501e 2003
RE: inlet manifold

do a search steve

sveeral people have harked on about them. i believe it may work but what concerns me is that it's good for breaking up fuel on standard rich bikes. on a well jetted bike the advantage should be negligable.

and all the guys that have tried it I BELIEVE!!!! (could be wrong!) have had standard bikes pretty much.

regards

Taffy
Taffy is offline  
November 26th, 2007, 12:25 PM   #3
Senior Member
 
Joined: Sep 2006
From: Hayle Cornwall

Posts: 987
Thanks: 22

I Ride:
Re: RE: inlet manifold

Cheers for that Taffy, I can see the method in his madness, I keep laminated glass fibre sheeting about the thickness of a credit card so i might have a bash a knocking one up.
Got an email from Jim saying he had put his in the mail Last Monday.
I stripped the one that came from the in the states looks like the engine it came from might of had main bearing failure definately flywheel contact.

Regards

Sparks.
sparks is offline  
November 26th, 2007, 01:32 PM   #4
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,615
Thanks: 441

I Ride: Husaberg FE501e 2003
RE: Re: RE: inlet manifold

steve

i nnever had mains trouble - honest! but my flywheels have alwayss rubbed against the stator?

doesn't everyone's!!!!!

even in my present engine they still rub.

must be why i'm so phucking quick!!!!! (LOL)!

i'll get me spondoolies out later in the week. i'm holding mrs pig upside down and stabbing her in the spin with a knife but she don't yeild easy!

roll on that new job!

regards

Taffy
Taffy is offline  
November 26th, 2007, 01:54 PM   #5
Senior Member
 
Joined: Sep 2006
From: Hayle Cornwall

Posts: 987
Thanks: 22

I Ride:
Re: RE: Re: RE: inlet manifold

Hi Taffy,

Rusty yes but rare to see the poles touched by the flywheel. You can see where the heat has got a the plastic bobbin through friction.Don't worry I have had to bin those.

Quick no dought you've been riding it long enough LOL..

As for my Mrs pig when turned up side down she just squeal's no knife needed LOL.. LOL.

Regards

Sparks.
sparks is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Fuel

Tags
inlet, manifold



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
inlet manifold rubber 650 hultz Mechanical 19 August 28th, 2012 01:38 AM
Aluminum intake manifold for 2002 FC550 to fit Keihin stephan Fuel 14 May 2nd, 2012 06:59 AM
Improved 6 - 400 inlet valves Taffy Mechanical 0 April 1st, 2011 04:31 AM
porting the inlet tract Taffy Mechanical 2 August 24th, 2005 03:20 AM
Inlet Valves twistthethrottle Mechanical 3 September 10th, 2004 10:31 PM


Facebook Twitter Google+ RSS Feed