Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Fuel

Fuel Fuel Delivery


Reply
 
LinkBack Thread Tools Display Modes
September 4th, 2007, 12:47 PM   #1
Junior Member
 
Joined: Feb 2007
From: Phoenix

Posts: 2
Thanks: 0

I Ride:
2006 FE550 FCR Carb Dissaembly Question

Last weekend took my Berg from 1000 feet to 7500, I only changed the MJ from 188 stock -> 178, seemed to do the trick .... it ran awesome, no backfire, good power range ...

Question I have is , how do I get at the needle clip on the FCR carb?

After I remove the top of the FCR carburetor, see the slide and a blue painted hex bolt, How do I remove the slide to change the clip setting?

I have not found this data on the site, if I missed it point me to the link,

Thanks in advance .......
acorupe is offline  
 
September 4th, 2007, 12:51 PM   #2
Senior Member
 
Joined: Mar 2005
From: West coast Sweden

Posts: 250
Thanks: 1

I Ride: Husaberg ICE 700cc and a Husaberg FE 570cc
Re: 2006 FE550 FCR Carb Dissaembly Question

Originally Posted by acorupe
Last weekend took my Berg from 1000 feet to 7500, I only changed the MJ from 188 stock -> 178, seemed to do the trick .... it ran awesome, no backfire, good power range ...

Question I have is , how do I get at the needle clip on the FCR carb?

After I remove the top of the FCR carburetor, see the slide and a blue painted hex bolt, How do I remove the slide to change the clip setting?

I have not found this data on the site, if I missed it point me to the link,

Thanks in advance .......
Open the bluepainted hex bolt in the middle, the needle is below it.
Easy if you just give full thottle on the handlebar, and the slide moves up to the top.
Regards
Thomas
Enginehardware is offline  
September 4th, 2007, 01:14 PM   #3
Junior Member
 
Joined: Feb 2007
From: Phoenix

Posts: 2
Thanks: 0

I Ride:
RE: Re: 2006 FE550 FCR Carb Dissaembly Question

Appreciated!
acorupe is offline  
September 4th, 2007, 03:13 PM   #4
Senior Member
 
bigbob's Avatar
 
Joined: Oct 2005
From: Folsom, CA

Posts: 687
Thanks: 0

I Ride:
RE: Re: 2006 FE550 FCR Carb Dissaembly Question

dont over tighten that hex nut back down and watch for the little spring and copper ring underneath the hex bolt that holds the needle in place. Real easy work, even I can do this.
bigbob is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Fuel

Tags
2006, carb, dissaembly, fcr, fe550, question



Search tags for this page
Click on a term to search for related topics.
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
2006 FE450 carb jetting RickCJ7 Fuel 27 June 27th, 2012 07:09 PM
97 FE 501 carb question The_Jarhead Mechanical 3 January 4th, 2012 06:27 AM
2006 FS 650C (slip-on exhaust) question Niner33 Husaberg 6 October 17th, 2011 12:21 PM
Carb question......again schultzy Suspension 0 February 24th, 2009 11:12 AM
carb question schultzy Fuel 7 May 13th, 2006 06:05 PM


Facebook Twitter Google+ RSS Feed