Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Fuel

Fuel Fuel Delivery


Reply
 
LinkBack Thread Tools Display Modes
July 4th, 2004, 11:04 AM   #1
Member
 
ROWLEY's Avatar
 
Joined: May 2004
From: Ipswich UK

Posts: 38
Thanks: 0

I Ride:
JOB DONE, IT STARTS BUT......

.......it won't idle!

In order to solve the decomp shaft oil leak, I've taken off the battery, s/motor, trans cover etc to put an O ring on the kickstart decomp shaft (inside). This involved removal of the clutch and kickstart assembly etc. It's all back together now.

It starts first or second kick but won't idle, and there's fuel appearing in the rubber carb boot

Have dismantled and cleaned the carb again, checked the timing, changed the plug - I'd done the valves around 2 hours ago (street use only). There is a spark that seems bluish, and all carb jets are standard.

The engine started and ran perfectly before the O ring job - but oil loss was big Upon kicking over with the air filter off I can see that fuel appears to be blowing back into the carb boot

Is there any chance that the timing chain could have slipped a bit while I was working on the left of the engine

That's another weekend without riding the Berg - and after my finances show I can keep it after all :P

Please, please provide help asap you clever lot

Best regards

Rowley
ROWLEY is offline  
 
July 5th, 2004, 01:20 AM   #2
Member
 
Joined: Mar 2004
From: South Africa

Posts: 30
Thanks: 0

I Ride:
Rowley

If you removed the clutch then it is possible that the timing is now incorrect. It happened to me before...

When you reinstall the clutch you need to make sure that the gears are properly lined up. Make sure the marks on the gears are perfectly aligned.

Good luck
B
biggish is offline  
July 5th, 2004, 01:44 AM   #3
Member
 
ROWLEY's Avatar
 
Joined: May 2004
From: Ipswich UK

Posts: 38
Thanks: 0

I Ride:
Clutch Removal etc

Hi B

Many thanks for your guidance!

I had a feeling this could be the prob, but my manual says nothing

I have an 01/02 650 SM - how do I go about putting things right

I really need your help - I've only ridden the thing a few times

Kind regards

Rowley
ROWLEY is offline  
July 5th, 2004, 08:55 AM   #4
Senior Member
 
JoeUSA's Avatar
 
Joined: Jun 2001
From: Pasadena Ca.

Posts: 1,355
Thanks: 0

I Ride:
Rowley,

Check out this thread

http://www.husaberg.org/modules.php?nam ... opic&t=463

Joe
JoeUSA is offline  
July 5th, 2004, 11:07 AM   #5
Member
 
ROWLEY's Avatar
 
Joined: May 2004
From: Ipswich UK

Posts: 38
Thanks: 0

I Ride:
To Joe

Thank's

I thought I ought to post in on 'mechanical' once I was assured it wasn't a fuel problem etc.

I gotta get this bike 'on the road'. About 3 hours riding in 6 weeks due to garage time

Many thanks

Rowley
ROWLEY is offline  
July 7th, 2004, 04:16 AM   #6
Senior Member
 
Joined: Jul 2003
From: Nth Tasmania ( Australia )

Posts: 330
Thanks: 0

I Ride:
Rowely

To get it at TDC "exactly" to help line up the "dots" on the cogs it helps to put a clamp on the the rear brake pedal to hold it "exactly" at TDC, otherwise it is so easy to misalign the dots.
Scully is offline  
July 7th, 2004, 09:58 AM   #7
Member
 
ROWLEY's Avatar
 
Joined: May 2004
From: Ipswich UK

Posts: 38
Thanks: 0

I Ride:
To Scully

.....I like that idea cheers.

Regards

Rowley
ROWLEY is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Fuel

Tags
job, starts



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
2001 fx-650 e-starts wooleyberger Electrical 15 November 24th, 2009 11:32 PM
FE400 - Starts but won't run off choke! Esto65 Mechanical 3 October 29th, 2009 03:50 PM
fe 450 e mod 2005 only starts with kick berg-mex Mechanical 1 January 23rd, 2006 09:59 PM
Hard cold starts 02 FE 400 deadeyedick Mechanical 4 February 5th, 2005 07:10 AM
Re: job done it starts but...... ROWLEY Mechanical 11 July 7th, 2004 10:07 AM


Facebook Twitter Google+ RSS Feed