Go Back   Husaberg Forum > Mechanical and Technical > Fuel

Fuel Fuel Delivery

LinkBack Thread Tools Display Modes
December 28th, 2018, 01:36 PM   #1
Junior Member
Joined: Dec 2018
From: Westport, CT

Posts: 1
Thanks: 0

I Ride:
New to forum with 2018 FE450 and blink code error

Im new to the forum and i just traded in my RMZ450 for a Husky Fe450. I modified the exhaust by removing the restrictor cone in the middle of the muffler and I also removed the double screen in the muffler end. Bike runs great but Iím getting 5 long blinks and 3 short blinks. I notice that the cooling fan comes on almost immediately. Any ideas on what I should do? I put 4 15 minute heat cycles on it and changed the oil, filter, screen before modding the muffler. I tried doing the static calibration and read hear that sometimes you just need to put some riding hours on it. Any suggestions would be most appreciated.
Frankym is offline  

  Husaberg Forum > Mechanical and Technical > Fuel

2018, blink, code, error, fe450, forum

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Getting a blink code for "Fuel pump relay" crazyshannon Fuel 18 November 5th, 2019 02:57 AM
Fuel Injection (FI) Blink Codes Ruger Fuel 14 August 24th, 2017 11:44 AM
FI Blink light stays on... yzracerdude Electrical 4 July 1st, 2015 12:15 PM
Reading FI Error Codes bkowal Electrical 2 May 30th, 2012 05:21 AM
Noblesse O Blink husabutt Tech 4 September 3rd, 2009 08:14 PM

Facebook Twitter Google+ RSS Feed