Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Fuel

Fuel Fuel Delivery


Thanks Tree7Thanks
Reply
 
LinkBack Thread Tools Display Modes
May 9th, 2018, 06:26 AM   #1
Senior Member
 
brucifer's Avatar
 
Joined: Jun 2009
From: Eureka CA

Posts: 189
Thanks: 23

I Ride:
Stock Jetting for Sea Level? 2005 FE650E

Hey guys! Looking for the stock jetting specs for my recently acquired FE650E.
It came from a higher altitude and is very hard to start and won't idle.
It could be the pilot is clogged and just needs a good cleaning--which I intend to do--but I would like to know if I have the correct factory jetting once I get in there. Stock exhaust is still in place.

Thanks!

Bruce
brucifer is offline  
 
May 9th, 2018, 10:45 AM   #2
Senior Member
 
Huskyfatman's Avatar
 
Joined: Mar 2006
From: SO.NV.

Posts: 219
Thanks: 71

I Ride:
Hey Brucifer, the stock jetting on my 2005 650 was horrendously lean when I bought it new. I called Dan at Motoxitica and he sent me the perfect jets to make her run cool and clean. I can't remember what I put in unfortunately but I would recommend you call him especially since he seems to be relatively near you.

MotoXotica - MotoXotica - Home
Thanks from bushmechanic and brucifer
Huskyfatman is offline  
May 9th, 2018, 06:09 PM   #3
Senior Member
 
pollo's Avatar
 
Joined: Jun 2008
From: Simi Valley Ca.

Posts: 1,083
Thanks: 98

I Ride: 2006 FS650e, 2007 FE550e, 2016 Ktm500Exc
The Book for 2005 FE650 says:
Main jet 160
Needle OBDVT (OBEKR)
Pilot jet 38 (45)
Maj 200
Iaj 100
clip 2nd from top (4th)
starting jet 85
mix screw .5 - 2.0 out



pollo
Thanks from brucifer

Last edited by pollo; May 9th, 2018 at 06:24 PM.
pollo is offline  
May 9th, 2018, 06:24 PM   #4
Senior Member
 
brucifer's Avatar
 
Joined: Jun 2009
From: Eureka CA

Posts: 189
Thanks: 23

I Ride:
Originally Posted by Huskyfatman View Post
Hey Brucifer, the stock jetting on my 2005 650 was horrendously lean when I bought it new. I called Dan at Motoxitica and he sent me the perfect jets to make her run cool and clean. I can't remember what I put in unfortunately but I would recommend you call him especially since he seems to be relatively near you.

MotoXotica - MotoXotica - Home
Sounds good Husky. Thank you!

Originally Posted by pollo View Post
The Book for 2005 FE650 says:
Main jet 160
Needle OBDVT (OBEKR)
Idle jet 38 (45)
Maj 200
Iaj 100
clip 2nd from top (4th)
starting jet 85
mix screw .5 - 2.0 out



pollo
Perfect. Thank you, Polo!
Thanks from pollo
brucifer is offline  
May 9th, 2018, 11:11 PM   #5
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,408
Thanks: 396

I Ride: Husaberg FE501e 2003
Originally Posted by pollo View Post
The Book for 2005 FE650 says:
Main jet 160
Needle OBDVT (OBEKR)
Pilot jet 38 (45)
Maj 200
Iaj 100
clip 2nd from top (4th)
starting jet 85
mix screw .5 - 2.0 out



pollo
does it REALLY say that Pollo? or is that modified jetting you put up there?

Brucifer that 160 is too small and I don't think that Husaberg put that jetting in their bikes. if they did, the 160 IS too small mate.

Taffy
Thanks from brucifer
Taffy is offline  
May 10th, 2018, 04:31 AM   #6
Senior Member
 
brucifer's Avatar
 
Joined: Jun 2009
From: Eureka CA

Posts: 189
Thanks: 23

I Ride:
Originally Posted by Taffy View Post
does it REALLY say that Pollo? or is that modified jetting you put up there?

Brucifer that 160 is too small and I don't think that Husaberg put that jetting in their bikes. if they did, the 160 IS too small mate.

Taffy
Appreciate it, Taffy. Thanks!
brucifer is offline  
May 10th, 2018, 04:33 AM   #7
Senior Member
 
pollo's Avatar
 
Joined: Jun 2008
From: Simi Valley Ca.

Posts: 1,083
Thanks: 98

I Ride: 2006 FS650e, 2007 FE550e, 2016 Ktm500Exc
Originally Posted by Taffy View Post
does it REALLY say that Pollo? or is that modified jetting you put up there?

Brucifer that 160 is too small and I don't think that Husaberg put that jetting in their bikes. if they did, the 160 IS too small mate.

Taffy
Yes it does say that for the 650 as well as nearly the same for 2006. Im not sure what is in my 06 650. The previous owner rejetted I believe. It runs good at sea level up to 3500 ft. My riding range. But I would think somewhere around a 165 would be about right.

pollo
pollo is offline  
May 18th, 2018, 04:07 PM   #8
Senior Member
 
brucifer's Avatar
 
Joined: Jun 2009
From: Eureka CA

Posts: 189
Thanks: 23

I Ride:
Okay, pulled the bowl and jets. The pilot was indeed plugged.
Pilot is a 52.
Main is a 175.

Next to the small parts, here's what I scooped out of the bowl.
Attached Thumbnails
Stock Jetting for Sea Level?  2005 FE650E-dsc00366.jpg  
brucifer is offline  
May 21st, 2018, 10:38 PM   #9
ede
Senior Member
 
ede's Avatar
 
Joined: Jul 2015
From: Germany

Posts: 117
Thanks: 88

I Ride: Husaberg FE 501 2002
Hi brucifer,
the magic word for the carburettor settings might be "GREEN"!

According to the manual the 450 and the 550 came with a 182 main jet! To meet emission regulations in certain countries the bikes were jetted pretty lean I guess. Biggest difference is needle position and main jet. You can go bigger on both, a 550-setting (main 182, needle 6th from top) should also work on your bike!
But your carb is Keihin FCR-MX 41? Otherwise the jetting is different of course!

Regards,
EDE
Attached Thumbnails
Stock Jetting for Sea Level?  2005 FE650E-2005-carburettor-setting.jpg  
Thanks from brucifer and Rainerio
ede is offline  
May 25th, 2018, 05:23 AM   #10
Senior Member
 
brucifer's Avatar
 
Joined: Jun 2009
From: Eureka CA

Posts: 189
Thanks: 23

I Ride:
Originally Posted by brucifer View Post
Okay, pulled the bowl and jets. The pilot was indeed plugged.
Pilot is a 52.
Main is a 175.

Next to the small parts, here's what I scooped out of the bowl.
Okay, just removed the needle and it is the stock OBDVT. With the 175 main listed above and sea level, where should I adjust the clip position? When I removed it, it was on the 6th position.

Thanks.
brucifer is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Fuel

Tags
2005, fe650e, jetting, level, sea, stock



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
2005 FE650E pollo Husaberg 5 April 9th, 2011 02:57 PM
Jetting for FE650E 2008 with Full Acrapovic system? ruostekasa Fuel 1 January 25th, 2008 10:06 PM
stock jetting? cangokaw Fuel 9 October 3rd, 2006 04:27 PM
2005 FE650E Triumphs Husaberg 14 January 26th, 2006 09:01 PM
stock jetting for a 2005 fe 650 e in usa Motoxotica Fuel 19 December 5th, 2005 03:38 PM


Facebook Twitter Google+ RSS Feed