Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Fuel

Fuel Fuel Delivery


Thanks Tree2Thanks
  • 2 Post By TomTom
Reply
 
LinkBack Thread Tools Display Modes
October 4th, 2017, 04:26 PM   #1
Junior Member
 
Joined: Oct 2014
From: canada

Posts: 23
Thanks: 2

I Ride:
inline filter

has anyone re located the fuel filter from the quick disconnect to were the fuel line connect to throttle bodie?

webfoot
webfoot is offline  
 
October 5th, 2017, 03:13 AM   #2
Senior Member
 
tourist's Avatar
 
Joined: Nov 2012
From: Iceland

Posts: 2,189
Thanks: 690

I Ride: 1 Berg, 1 Zook
Interesting. I haven't, but I've got a Golan Super Mini ready to go on my 570. What would be the difference you think?
tourist is offline  
October 5th, 2017, 03:36 PM   #3
Member
 
RogerB39's Avatar
 
Joined: Oct 2011
From: Pacific Northwest

Posts: 72
Thanks: 11

I Ride: '10FX450-sold,'08KTM 690SMR(SOLD),'12KTM250SXF(SOLD) '16 Husky FC250 SMracebike,'14Triumph Thruxton
FWIW, the 2010 FX450 didn't even have the filters from the factory.
At least mine didn't.
RogerB39 is offline  
October 6th, 2017, 03:19 AM   #4
Senior Member
 
Joined: Nov 2011
From: Nordic countries

Posts: 998
Thanks: 439

I Ride: Two FE570 -12
I relocated that filter to the trash after advice from my husaberg seller. Just like tourist I have a micro golan.

The first black from KTM was 10 micron. That swelled up restricting the fuel. Instead of keeping a 10 micron filter that KTM originally deemed needed they "fixed" that problem by installing a 15 micron filter (grey). So one can assume that when the 15 micron swells up due to heat it becomes a 10-ish?? Sloppy solution imho. So I purchased a micro golan that I can clean.

So if you want to use that filter I guess it would be better closer to the quick disconnect as that should be a cooler place than up next to the injector? Just a thought.
jon andersson is offline  
October 6th, 2017, 03:44 AM   #5
Senior Member
 
Joined: Nov 2012
From: Sweden

Posts: 471
Thanks: 390

I Ride: HB 570 FE
An alternative route is the KTM filter for the 2014 450 exc, part number 9, 12 and 14 in the pic. The male (#12) will fit the berg oem female.

Easily accessed and cleanable, works good on my bike.

Thanks from jon andersson and F70X

Last edited by TomTom; October 6th, 2017 at 04:02 AM.
TomTom is offline  
October 6th, 2017, 06:07 AM   #6
Senior Member
 
Joined: Nov 2011
From: Nordic countries

Posts: 998
Thanks: 439

I Ride: Two FE570 -12
That's quite a good solution! As long as one changes the filters it works. To keep it hidden in a remote location is not the best.
jon andersson is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Fuel

Tags
filter, inline



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
inline hose fuel filter damage - picture inside jeffk95z Fuel 7 September 20th, 2014 02:57 PM
Efi inline filters berglsmerg Fuel 0 February 12th, 2012 02:19 AM
Inline fuel filter removal ? PhaZer_SWE1234 Fuel 30 December 2nd, 2011 01:24 AM
BLUE Throttle Cables with inline adjuster midwest Marketplace 7 August 1st, 2011 01:59 PM
Radiator hose Inline fitting for fan temp switch DAY51 Cooling Systems 1 March 1st, 2010 01:11 PM


Facebook Twitter Google+ RSS Feed