Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Fuel

Fuel Fuel Delivery


Thanks Tree6Thanks
Reply
 
LinkBack Thread Tools Display Modes
September 15th, 2017, 08:54 PM   #41
Member
 
Joined: Mar 2017
From: Vancouver, BC

Posts: 59
Thanks: 10

I Ride: 2008 FE 550
Originally Posted by GjimC View Post
The brass fuel inlet fitting is Keihin Part Number: 1074-892-2100
The three O-Rings are Keihin Part Number:W9351-13057

Just google the part numbers and you will come up with numerous suppliers
Hi CJim,

Thanks for the part number(s).

I took the L-joint out and the o-rings are super hardened. Split all of them as I tried removing them. So I better find some soon! Lol

Joint itself looks fine. Hoping these three o-rings are part of the aforementioned kit - then I'll be set.

Thanks,

cm

Last edited by canadius; September 15th, 2017 at 10:09 PM. Reason: Updated info / findings
canadius is offline  
 
September 16th, 2017, 01:03 AM   #42
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,136
Thanks: 351

I Ride:
i sell them fella.
Taffy
Taffy is offline  
September 16th, 2017, 08:06 AM   #43
Member
 
Joined: Mar 2017
From: Vancouver, BC

Posts: 59
Thanks: 10

I Ride: 2008 FE 550
Originally Posted by Taffy View Post
i sell them fella.
Taffy
Thanks. The L-joint fitting or the o rings or both?

Speaking of the fitting, I found reference online to a 2-1 fitting that you sold, at one point. Do you still? Here's the one:



http://husaberg.org/wiki/husaberg-ca...into-one-pipes

Scoured your site but no luck.

Because I'm running the underseat tank, and that would simplify the plumbing. Right now I've got two T fittings side by side in order to bring fuel into the carb from the two front tank taps and the one rear tank tap.

Instead, running a separate hose to the second inlet for the rear would clean things up in that cluttered area under the rearmost big carb boot.

Thx.

Last edited by canadius; September 16th, 2017 at 08:09 AM.
canadius is offline  
September 17th, 2017, 03:15 AM   #44
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,136
Thanks: 351

I Ride:
let's stick to business away from here fella

info@taffmeisters.co.uk please?

we did a couple of those 2 into 1's but my man didn't want to make anymore.

I reckon what with my belmouth mod, the 44mm conversion, the 2 into 1, jetting kits plus I reckon someone should make wide wheels for the slides: that there's a mini-business in Keihins somewhere out there.

Taffy
Taffy is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Fuel

Tags
carb, fcr



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
fcr carb mk 4 Fuel 3 July 4th, 2011 03:48 AM
'02 FE carb xenri90 Mechanical 5 February 27th, 2011 07:44 AM
What carb is this ?? zaga Fuel 23 February 4th, 2011 03:18 AM
carb bazbla Mechanical 1 June 11th, 2008 11:49 AM
So who has an FCR carb? dave186 Fuel 51 July 4th, 2004 10:54 AM


Facebook Twitter Google+ RSS Feed