Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Fuel

Fuel Fuel Delivery


Reply
 
LinkBack Thread Tools Display Modes
February 27th, 2017, 09:38 AM   #1
Junior Member
 
Joined: Feb 2017
From: Finland

Posts: 1
Thanks: 0

I Ride: FE450
Fuel inside the induction boot/air filter box

FE450 2009 somehow breaths fuel inside the airbox.
There is also little fuel in motor oil.
Any idea where I should start working this problem?
Its not a leakage for sure.

Thanks for help!
SwampBergie is offline  
 
March 2nd, 2017, 12:29 AM   #2
Senior Member
 
paolo6's Avatar
 
Joined: Nov 2016
From: chester

Posts: 128
Thanks: 75

I Ride:
I have the 650 I never seen the airbox of the new model ...but I am sure it might be the breather as I have the same problem if I rev it after a ride in find some oil on the airbox (not petrol) so I am planning to run the breather outside it or find a solution to keep them separate ...fuel in the motor oil? Uhm i heard of leaking from rad(water) but never fuel ...

Ps there is always some fuel in the oil maybe 1/2% but that doesn't compromise it ...it should evaporate after a ride (not in a startup)

That's my 2 cent
paolo6 is offline  
March 2nd, 2017, 05:53 AM   #3
Senior Member
 
Joined: Nov 2011
From: Nordic countries

Posts: 834
Thanks: 317

I Ride: Two FE570 -12
Maybe it leaks past the valve stems? Then you get fuel into the top where it will get pushed out into the airbox and ofcourse some will go into the oil.
jon andersson is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Fuel

Tags
boot or air, box, filter, fuel, induction, inside



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fuel in air boot..... HarryJae Fuel 3 October 20th, 2016 09:50 PM
inline hose fuel filter damage - picture inside jeffk95z Fuel 7 September 20th, 2014 02:57 PM
Fuel line inside tank for fi bikes mikej55 Fuel 0 May 20th, 2014 05:56 PM
09-12 FE450 vs FE570 induction boot differences? maKe Mechanical 6 May 2nd, 2013 12:32 PM
Fuel line inside diameter - 1/4 or 5/16 inches? chilledspode Fuel 9 December 4th, 2006 08:40 AM


Facebook Twitter Google+ RSS Feed