Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Fuel

Fuel Fuel Delivery


Thanks Tree3Thanks
Reply
 
LinkBack Thread Tools Display Modes
March 26th, 2017, 12:39 PM   #21
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,096
Thanks: 337

I Ride:
OK, I'm on it! we just got those throttle housings and Julia didn't check that a cable would fit but because we have another one here we should sort it quickly. can you send it back to us? we can pay your postage but please send it via USPS and slow and cheap.

regards

Taffy
Taffy is offline  
 
March 27th, 2017, 02:51 AM   #22
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,096
Thanks: 337

I Ride:
hello

julia here .. we are going to sort this just bare with us.. we have to measure the thread and find out if our supplier has them or has to make them or have them made... we are gonig to "play" around in the workshop and test a few things to see if it works.
my question to you is does the cable fit into the carb ?
the only thing wrong with the cable is the thread size? is this correct

many thanks
julia
Taffy is offline  
June 10th, 2017, 04:05 PM   #23
Junior Member
 
Joined: Mar 2016
From: Hurricane, UT

Posts: 27
Thanks: 1

I Ride: 1998 FE400
Originally Posted by Taffy View Post
hello

julia here .. we are going to sort this just bare with us.. we have to measure the thread and find out if our supplier has them or has to make them or have them made... we are gonig to "play" around in the workshop and test a few things to see if it works.
my question to you is does the cable fit into the carb ?
the only thing wrong with the cable is the thread size? is this correct

many thanks
julia
Sorry I haven't replied, but life finally slowed down recently. The cable you sent is perfect except for the threads at the handlebar end. I went to a local hardware store to confirm the thread size. I need a throttle cable with M8 x 1.25 thread. You sent one with M10 x 1.25 thread. Let me know how to get reimbursed for shipping this cable back to you.
bholmes is offline  
June 11th, 2017, 08:08 AM   #24
Junior Member
 
Joined: Mar 2016
From: Hurricane, UT

Posts: 27
Thanks: 1

I Ride: 1998 FE400
Replacement throttle cable-img_2141.jpg

Replacement throttle cable-img_2143.jpg
bholmes is offline  
June 12th, 2017, 02:15 AM   #25
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,096
Thanks: 337

I Ride:
Hello

If you are happy with the total length of the cable
if you are happy with the excess of wire out of the cable
if you are happy with the nipple and adjustment to fit the mikuni
if you're happy with the barrel nipple at the throttle end

....then I would be sorely tempted to change the throttle assembly to a Domino from 99-03
or
to file all the thread away and get down to 8mm diameter and put a tap on it.

but your problem is at the HANDLEBAR end and not the carb end which is where we thought you'd have trouble!

ho-hum!!!!!

Taffy
Taffy is offline  
June 12th, 2017, 06:11 AM   #26
Junior Member
 
Joined: Mar 2016
From: Hurricane, UT

Posts: 27
Thanks: 1

I Ride: 1998 FE400
Originally Posted by Taffy View Post
Hello

If you are happy with the total length of the cable
if you are happy with the excess of wire out of the cable
if you are happy with the nipple and adjustment to fit the mikuni
if you're happy with the barrel nipple at the throttle end

....then I would be sorely tempted to change the throttle assembly to a Domino from 99-03
or
to file all the thread away and get down to 8mm diameter and put a tap on it.

but your problem is at the HANDLEBAR end and not the carb end which is where we thought you'd have trouble!

ho-hum!!!!!

Taffy
All of the above are true. The barrel at the handlebar end may be too large to fit an 8mm die over it, and it is definitely too large to fit a new 8 mm nut over it. If it were fashioned with a gap or split (similar to a cable pull brake on a mountain bike) then it could slide over the cable below the barrel.

bholmes is offline  
June 12th, 2017, 06:26 AM   #27
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,096
Thanks: 337

I Ride:
then get a domino throttle for it which was the OEM item anyway!

you can take a little off the corners off the barrel nipple to make it all work.

Taffy
Taffy is offline  
June 22nd, 2017, 04:41 PM   #28
Junior Member
 
Joined: Mar 2016
From: Hurricane, UT

Posts: 27
Thanks: 1

I Ride: 1998 FE400
Tell me where I can find the domino throttle cable
bholmes is offline  
June 22nd, 2017, 08:59 PM   #29
Member
 
Joined: Aug 2016
From: USA

Posts: 43
Thanks: 14

I Ride: 99 FC600, 95 FC501, 94 FE501
He said throttle, not cable.

The cable you received is the correct one, if your bike is 100% original. The problem is you do not have the original throttle housing, i.e., the twist grip, that came on the bike from the factory.

The throttle from an 08 KTM 200 xc-w should be the same as the original domino throttle that came on your bike from the factory. Its $47 from Rocky Mtn Atv.
VOR165 is offline  
June 23rd, 2017, 10:10 PM   #30
Junior Member
 
Joined: Mar 2016
From: Hurricane, UT

Posts: 27
Thanks: 1

I Ride: 1998 FE400
I have a domino throttle on it, but it's not the oem based on the parts catalog, so I'm lost as far as what to do now. I'm likely to make another $50 purchase that leaves me still without a working throttle.
bholmes is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Fuel

Tags
cable, replacement, throttle



Search tags for this page
Click on a term to search for related topics.
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
96 fe 350 throttle cable husaraiser Husaberg 3 September 12th, 2015 06:28 AM
Throttle cable help! Thurston Mechanical 7 January 10th, 2013 05:58 AM
1998 600 throttle cable question scott600 Mechanical 5 February 3rd, 2012 09:19 AM
2004 FE450 Throttle cable ben_moto501 Husaberg 5 August 28th, 2011 11:03 PM
throttle cable problem BelgiqueBasterd Fuel 1 April 6th, 2008 11:20 AM


Facebook Twitter Google+ RSS Feed