Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Fuel

Fuel Fuel Delivery


Reply
 
LinkBack Thread Tools Display Modes
December 10th, 2013, 06:07 PM   #1
Junior Member
 
Joined: Feb 2013
From: Canada

Posts: 8
Thanks: 0

I Ride:
Underseat Tank Mounting Pics?

Hi All-
I assume the CDI mounting tab needs to be cut off? Can anybody give me more info on where the CDI is best relocated to?
Thanks!
Matthew
HelmetFire is offline  
 
December 10th, 2013, 06:47 PM   #2
Member
 
Joined: Feb 2012
From: Townsville Australia

Posts: 83
Thanks: 2

I Ride: 2008 FE650
Re: Underseat Tank Mounting Pics?

I ziptied mine to the frame under the fuel tank, was just enough room and it's away from the heat. I couldn't find anywhere else.
08FE650 is offline  
December 10th, 2013, 07:19 PM   #3
Senior Member
 
Joined: Jun 2001
From: Troutdale, Oregon USA 2005 FE550e

Posts: 1,274
Thanks: 10

I Ride:
Re: Underseat Tank Mounting Pics?

Here's some pics of what I did. The cdi is away from dirt/mud/heat and is well protected. The perfect and easy solution!



Just a piece of aluminum flat-bar with a couple strips of pre-dried silicone to help keep it from slipping back.






logjump is offline  
December 11th, 2013, 07:12 AM   #4
Senior Member
 
Joined: Nov 2010
From: montreal,Canada

Posts: 235
Thanks: 17

I Ride: 2005 fs650
Re: Underseat Tank Mounting Pics?

+1 to how logjump did it.

I have relocated my ecu the same way
helithumper is offline  
December 11th, 2013, 01:55 PM   #5
Member
 
Joined: Feb 2012
From: Townsville Australia

Posts: 83
Thanks: 2

I Ride: 2008 FE650
Re: Underseat Tank Mounting Pics?

Aren't you guys worried about it wearing a hole in your filter?
08FE650 is offline  
December 12th, 2013, 07:26 AM   #6
Senior Member
 
Joined: Nov 2010
From: montreal,Canada

Posts: 235
Thanks: 17

I Ride: 2005 fs650
Re: Underseat Tank Mounting Pics?

I've had my ECU set up this way for about 15,000km's or roughly 200hr's with no issues of ripping the airfilter.
helithumper is offline  
December 12th, 2013, 04:08 PM   #7
Senior Member
 
bushmechanic's Avatar
 
Joined: Jun 2007
From: south east WA Australia

Posts: 3,840
Thanks: 1165

I Ride: 2008 700FK, 2002 628FST
Re: Underseat Tank Mounting Pics?

that looks good Log

my version for MX, only requires headlight removal and welding over the VIN number





the ktm RFS bikes put their ECU up near the head stock but back and on one side .. might work on a berg
bushmechanic is offline  
December 13th, 2013, 03:21 PM   #8
Senior Member
 
Joined: Nov 2010
From: montreal,Canada

Posts: 235
Thanks: 17

I Ride: 2005 fs650
Re: Underseat Tank Mounting Pics?

hey bushie

If you mount the ecu up near the headset, wouldn't you have to cut and extend the OEM wire harness?

it's a great place for the ecu if your prone to deep water crossings. Better chance of keeping it dry.
helithumper is offline  
December 13th, 2013, 06:52 PM   #9
Senior Member
 
bushmechanic's Avatar
 
Joined: Jun 2007
From: south east WA Australia

Posts: 3,840
Thanks: 1165

I Ride: 2008 700FK, 2002 628FST
Re: Underseat Tank Mounting Pics?

on mine i was able to use the stock wiring
bushmechanic is offline  
December 15th, 2013, 10:49 AM   #10
Senior Member
 
Joined: Jun 2011
From: Northern California

Posts: 559
Thanks: 116

I Ride:
Re: Underseat Tank Mounting Pics?

The previous owner relocated it here, it's ziptied on top/behind the relay.



Idle is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Fuel

Tags
mounting, pics, tank, underseat



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Want to Buy - Underseat tank, side panel tank - 08 FE550 HelmetFire Husaberg 3 December 1st, 2013 09:49 AM
underseat fuel tank cypher Fuel 1 July 7th, 2007 05:22 PM
Sano Underseat Tank Installation on 2005 fe 650 baja_racer Fuel 0 March 5th, 2006 09:06 PM
1 gallon underseat tank? nevada_dirtbiker Fuel 3 February 20th, 2006 08:54 PM
Underseat Fuel Tank Scoobie Fuel 6 July 6th, 2005 01:57 PM


Facebook Twitter Google+ RSS Feed