98FE600 Carb Swap - Page 3

cheezy501 · January 5th, 2019, 01:54 PM

Originally Posted by zaga

Hi

For the FCR retrofit just buy the kit from Taffy

ZAGA

Is it still available today, necro-mancing this '98 FE600 thread as I know mine has a great motor but this carb is killing me! Taffy?

Sticker shock on the FCRs, the Mikuni TM40 Pumper is much more affordable. Sudco for the right boots?

Bah, disregard, ordered Taffmaster's spruce up kit.

cheezy501 · January 8th, 2019, 03:17 AM

Originally Posted by Taffy

Hey Dingo

just spruce up the carb and ride it. make sure the tappet clearances are set at the 'sixth of a turn' and also that the ignition timing is as follows

the white line that you can see through the hole in the cover is about 1mm to the left of centre.

http://www.ebay.co.uk/itm/HUSABERG-DELL ... 3cd17d6680

at the altitude you're riding at I would suggest a couple of smaller MJs as well and then a little experimenting. the easy thing about altitude riding is that you are testing the bike's jetting without changing it just by going up and down. testing is very easy although a compromise is always a balancing act.

regards

Taffy

Taff, ordered one of your kits via E-Bay store for the '98 FE600e, coming to Wisconsin. Do you need any other details?

Is there a video you would recommend for doing this work? My first time doing carb work as such....Thank You!

Taffy · January 8th, 2019, 06:29 AM

thanks for the order. um video? no not really as i have never done one about tuning a carb. there is a video about filing the mouth of the slide bigger and you'll be required to do that.

the instructions are comprehensive with many diagrams.

cheers

Taffy

cheezy501 · January 8th, 2019, 03:18 PM

Originally Posted by Taffy

thanks for the order. um video? no not really as i have never done one about tuning a carb. there is a video about filing the mouth of the slide bigger and you'll be required to do that.

the instructions are comprehensive with many diagrams.

cheers

Taffy

Very good then.

First pints on me!!!

Husaberg 600 carburetor set up