Go Back   Husaberg Forum > Mechanical and Technical > Fuel

Fuel Fuel Delivery

LinkBack Thread Tools Display Modes
December 13th, 2012, 07:41 PM   #1
Junior Member
Joined: Oct 2012

Posts: 7
Thanks: 0

I Ride:
'10 FE 390 Idle Issue

I just had a major rebuild done on my bike and after assembly, it starts and runs fine with the idle speed adjustment screw pulled out, but immediately dies when it is pushed in. Before the blow up, the bike started flawlessly every time with no need to pull out the screw.

I can get the bike to run with the screw pushed in, but it sounds like it is starved for air and doesn't respond well off idle.

The injector was replaced with the rebuild.

Any ideas?
wetsiderider is offline  

  Husaberg Forum > Mechanical and Technical > Fuel

390, idle, issue

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
FS 570 Idle Issue gohard007 Fuel 2 May 19th, 2012 10:40 AM
95 FE 501 no idle Husadabbler Fuel 3 June 9th, 2010 09:31 AM
09 idle PJ Fuel 2 December 25th, 2008 04:50 PM
Idle only, no run! Dust_Buster Husaberg 2 January 20th, 2005 09:25 PM
Idle When Hot lesmoto Mechanical 8 May 27th, 2004 12:23 PM

Facebook Twitter Google+ RSS Feed