Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Fuel

Fuel Fuel Delivery


Reply
 
LinkBack Thread Tools Display Modes
December 2nd, 2011, 08:54 AM   #11
Moderator
 
ned37's Avatar
 
Joined: Dec 2004
From: back in cottonwood, az

Posts: 2,389
Thanks: 215

I Ride: '08 HUSKY te610
Re: 1998 fs600 carb question

to set the valves, just pull the inspection plates so you can see the adjusters, pull the plug, rotate the engine clockwise using the flywheel nut. (don't use a ratchet) rotate til the intake valves open then close, put something flexible like a tie wrap in the plug hole and rotate slowly til the tie stops rising. adjust the valves to the 1/6 turn out method.
ned37 is offline  
 
Reply

  Husaberg Forum > Mechanical and Technical > Fuel

Tags
1998, carb, fs600, question



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
1998 fe600s pop thru carb scott600 Mechanical 30 February 7th, 2012 06:31 AM
1998 600 throttle cable question scott600 Mechanical 5 February 3rd, 2012 08:19 AM
97 FE 501 carb question The_Jarhead Mechanical 3 January 4th, 2012 05:27 AM
Carb question......again schultzy Suspension 0 February 24th, 2009 10:12 AM
carb question schultzy Fuel 7 May 13th, 2006 05:05 PM


Facebook Twitter Google+ RSS Feed