Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Fuel

Fuel Fuel Delivery


Reply
 
LinkBack Thread Tools Display Modes
February 16th, 2011, 01:26 PM   #1
Junior Member
 
Joined: Feb 2011
From: Carolina Coast

Posts: 7
Thanks: 0

I Ride:
2000 'Berg 600 project

Hi guys, I am trying to reserect a Berg into a SuperMoto commuter and funds are tight. Along with everything else going on I am going to have to rebuild the stock DelOrto which I have torn down and cleaned.
I would love to go with an FCR conversion but that is going to have to wait. I have tweaked many Mikuni's over the years so I expect the DelOrto should be pretty straight foreward ?
My question is this - is anyone on this site selling a re-build kit or can recommend a favorable dealer? I really would like to cater to a UHE site member.
Any tips/tricks you would like to pass on would be great, I will take "easy to start and reliable service" over max power any day. I am reading the past posts now so if this has been covered feel free to flame me.

Regards !
Fuzzy is offline  
 
February 16th, 2011, 09:07 PM   #2
Senior Member
 
FC501EAST's Avatar
 
Joined: Mar 2002
From: SCARBOROUGH, ME.

Posts: 438
Thanks: 0

I Ride:
Re: 2000 'Berg 600 project

Hi, Fuzzy....
I get my Dellorto parts from http://www.herdan.com, Port Clinton, PA. Telly is 1-610-562-3155. They are a Dellorto stocking dealer. Never had a problem not being able to get parts from them, and far less expensive than Sudco. Last time I bought parts (2010) pilot and main jets were $3.95,, K series needles were $9.96, gasket kits for my PHM40ZS were $13 to $15.
If ya need a major Dellorto resto, try the guys at Bevel Heaven, out on the west coast (I think). This is the link to their page : http://www.bevelheaven.com/productinfo.html
FC501EAST is offline  
February 17th, 2011, 02:21 AM   #3
Senior Member
 
zaga's Avatar
 
Joined: Mar 2009
From: Portugal

Posts: 1,383
Thanks: 247

I Ride: KTM 300 XC
Re: 2000 'Berg 600 project

Hi Fuzzy

You can have a rebuid and tuning Kit from one UHE menber, its from Taff.

He has a site and on line ebay shop (TAFFMEISTERS), he will help you with that.


ZAGA
zaga is offline  
February 17th, 2011, 11:29 AM   #4
Junior Member
 
Joined: Feb 2011
From: Carolina Coast

Posts: 7
Thanks: 0

I Ride:
Re: 2000 'Berg 600 project

Thanks all, I appreciate the info.
I have just noticed the Nikasil bore plating has a ring of corrosion going around the middle of it so I guess the carb is on hold while attend to that. After cleaning it with soap and scotchbright you can see where it has gone through the plating and into the cylinder.
Blast !
I can handle the mechanical stuff, this one is out of my abilities and will have to contract that out. I would gather it will be cheaper to get a used cylinder
Fuzzy is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Fuel

Tags
2000, 600, berg, project



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
2000 'Berg 600 project Fuzzy Mechanical 8 February 17th, 2011 11:42 AM
Husaberg Project - A big one.... EllTEll Mechanical 17 June 6th, 2010 06:20 AM
project wanted! uk Taffy Husaberg 2 September 20th, 2008 02:45 AM
Will the auxiliary gas tank fit a 2000 'berg? GregM Husaberg 1 October 20th, 2004 08:49 PM
Best timing chain for post 2000 Berg??? Dale, ... PowerFiend Mechanical 3 September 20th, 2004 12:12 AM


Facebook Twitter Google+ RSS Feed