Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Fuel

Fuel Fuel Delivery


Reply
 
LinkBack Thread Tools Display Modes
August 30th, 2010, 06:10 AM   #1
Junior Member
 
Joined: Aug 2010
From: Hampshire, United Kingdom

Posts: 18
Thanks: 0

I Ride:
FE390 2011 Stalling

I think i have a fuel issue, have brand new 390 2011, however if i aggresively open the throttle the bike stalls, is fine when i feather open the throttle, Please advise
Rich T is offline  
 
August 30th, 2010, 06:33 AM   #2
Senior Member
 
Joined: Jan 2003
From: Stratford, ONT

Posts: 436
Thanks: 3

I Ride:
Re: FE390 2011 Stalling

Check your fuel pump filters to see if they are clogged. If your tank was not cleaned out during PDI, that will be your problem.
Scott is offline  
August 30th, 2010, 09:22 AM   #3
Junior Member
 
Joined: Aug 2010
From: Hampshire, United Kingdom

Posts: 18
Thanks: 0

I Ride:
Re: FE390 2011 Stalling

Eventually got tank off and checked filters and all clean, have put back together and still same, thanks for suggestion though.

Rich T
Rich T is offline  
August 30th, 2010, 12:59 PM   #4
Senior Member
 
Joined: Oct 2009
From: Galston Australia

Posts: 995
Thanks: 13

I Ride:
Re: FE390 2011 Stalling

Is the idle speed set too low?
Davo is offline  
August 30th, 2010, 05:00 PM   #5
Moderator
 
Joined: Oct 2002
From: Sunland, CA

Posts: 3,117
Thanks: 19

I Ride:
Re: FE390 2011 Stalling

Take it back to the dealer and let them sort it out!! It being brand new and all it's under warranty.
DaleEO is offline  
August 31st, 2010, 10:22 AM   #6
Junior Member
 
Joined: Aug 2010
From: Hampshire, United Kingdom

Posts: 18
Thanks: 0

I Ride:
Re: FE390 2011 Stalling

Thanks Dale and i will take back to dealers (Midwest Racing) if i cannot cure but dealers are a fair drive away, hence why i am asking on here, have spoke to dealers who are fantastic and have suggested a few things as well, but they themselves would like me to take back as they seem very customer orientated and want to help solve problem.
Rich T is offline  
August 31st, 2010, 01:01 PM   #7
Senior Member
 
Joined: Dec 2008
From: hants uk

Posts: 161
Thanks: 0

I Ride:
Re: FE390 2011 Stalling

hiya mate.
bit of a bad start to your new ride,hope its something simple,where you from
fakesy is offline  
August 31st, 2010, 01:38 PM   #8
Senior Member
 
Joined: Oct 2009
From: Galston Australia

Posts: 995
Thanks: 13

I Ride:
Re: FE390 2011 Stalling

Originally Posted by Rich T
have spoke to dealers who are fantastic and have suggested a few things as well
Just as a matter of interest, what did your dealer suggest?
Davo is offline  
August 31st, 2010, 05:41 PM   #9
Senior Member
 
Joined: Jun 2010
From: Andover, UK

Posts: 209
Thanks: 0

I Ride:
Re: FE390 2011 Stalling

Originally Posted by DaleEO
It being brand new and all it's under warranty.
Only for the first 30 days though, if it's the same as my '09 was. Still, since they know the problem already exists I'm sure they'd still try to fix it even if the bike didn't get back to them until after that.

Just a thought - how's the air filter? Not blocked in any way or over-oiled? Sounds either something like that or maybe not enough fuel available when it needs a burst (maybe the pump itself not producing enough pressure even though the fuel filter's ok). Or something wrong with the fuel mapping. Do you have the mapping switch, and if so have you tried all the mappings to see if it's the same on all of them? If you don't have a mapping switch I have a spare you could borrow to try that, now I've fitted the 70 Degree Racing one instead (went on a treat and looks good BTW Dale, only hope the tank's just as quick & easy to fit!).

Like fakesy said, whereabouts in Hampshire are you? If you're not too far away, as a special favour I might be able to pop round and test ride it for you for a few hours, just to help out. I'm very considerate like that.
petem is offline  
September 1st, 2010, 05:39 AM   #10
Senior Member
 
Joined: Dec 2008
From: hants uk

Posts: 161
Thanks: 0

I Ride:
Re: FE390 2011 Stalling

yep come to think of it,i had problems when i put much foam oil on my airfilter,it didnt like so now use spray oil just a light covering & no probs.
may be a spin up the planes coming on then chaps!
fakesy is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Fuel

Tags
2011, fe390, stalling



Search tags for this page
Click on a term to search for related topics.
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
2010 or 2011 FE390? doolin64 Husaberg 30 March 27th, 2014 04:16 AM
2011 FS570 Stalling SLOBRA Husaberg 8 May 27th, 2013 01:16 AM
2011 Husaberg 390 Stalling zabe45 Mechanical 1 April 6th, 2012 04:40 PM
2011 FE390 is home now!! WOO HOO!!! Ocotillo Boy Husaberg 4 January 2nd, 2012 03:22 PM
Best Map for 2011 FE390? djll Husaberg 0 April 28th, 2011 10:50 AM


Facebook Twitter Google+ RSS Feed