Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Fuel

Fuel Fuel Delivery


Reply
 
LinkBack Thread Tools Display Modes
November 17th, 2009, 12:26 PM   #1
Member
 
Joined: Jul 2008
From: Whitchurch-Stouffville, Ontario, Canada

Posts: 91
Thanks: 0

I Ride: 2010 FE390
THROTTLE CABLE & BEND TUBE, 03 FE400, KTM PART #?

I need to replace my throttle cable, including the 'tube bend' on my '03 FE400. Is the cable and / or the tube a common part with any KTM model? If so where do I get the part number cross reference?

Getting parts for my Berg is a nightmare in the Toronto area!
Esto65 is offline  
 
November 17th, 2009, 12:52 PM   #2
Senior Member
 
husabutt's Avatar
 
Joined: Feb 2003
From: Escondido, Ca. USA

Posts: 3,072
Thanks: 323

I Ride: 2005 Fe450,2001 Fx470,1997 Fx600
Go to bikebandit.com,

Using the Husaberg part number from the parts manual do a OEM Husaberg part search with the part number. If there are any KTM cross reference parts they will be listed.

The part number that appears will usually not be a KTM part number but you will know the year and model that uses the same part.
husabutt is offline  
November 17th, 2009, 01:20 PM   #3
Member
 
Joined: Jul 2008
From: Whitchurch-Stouffville, Ontario, Canada

Posts: 91
Thanks: 0

I Ride: 2010 FE390
Thank's for the suggestion but Bike Bandit has '04's and up! The 03 is still a Dellorto, 04's were already KEIHIN carbs.
Esto65 is offline  
November 17th, 2009, 01:42 PM   #4
Senior Member
 
husabutt's Avatar
 
Joined: Feb 2003
From: Escondido, Ca. USA

Posts: 3,072
Thanks: 323

I Ride: 2005 Fe450,2001 Fx470,1997 Fx600
It usually doesn't matter. Their KTM parts go back quite a ways. The Husaberg parts catalog in the computer goes all the way back to the beginning but the schematics start at 2004.

Another way is to look up the schematics on a bike that you think may be similar.

Try a 2000 KTM 660 Rallye. Anything that uses a Dellorto carb and Domino throttle will probably be the same.

Anything that uses the LC4 motor is probably a good place to start.

For internal engine parts try something that uses the RFS motor.
husabutt is offline  
November 17th, 2009, 01:56 PM   #5
Member
 
Joined: Jul 2008
From: Whitchurch-Stouffville, Ontario, Canada

Posts: 91
Thanks: 0

I Ride: 2010 FE390
I looked at LC4 schematics, it too uses a DELLORTO, but the tube bend does a 45 instead of a 90.
Esto65 is offline  
November 17th, 2009, 02:13 PM   #6
Senior Member
 
husabutt's Avatar
 
Joined: Feb 2003
From: Escondido, Ca. USA

Posts: 3,072
Thanks: 323

I Ride: 2005 Fe450,2001 Fx470,1997 Fx600
You can lead a horse to water.........................


Keep an eye out on Ebay,last week I purchased a complete new Domino throttle assembly for 10 bucks + shipping. Sorry its not for sale.
husabutt is offline  
November 17th, 2009, 02:29 PM   #7
Member
 
Joined: Apr 2007
From: Lafayette, CA USA

Posts: 90
Thanks: 0

I Ride:
I just replace one on a FE 400 before I sold it. I got the cable from local shop Husky dealer like http://www.motoxotica.com/
I had to get the elbow here http://www.bevelheaven.com/stuff-for-sale-dellorto.htm
You could get both part from one these dealers. Never had any luck with the Bandits
Husahoff is offline  
November 17th, 2009, 02:36 PM   #8
Member
 
Joined: Jul 2008
From: Whitchurch-Stouffville, Ontario, Canada

Posts: 91
Thanks: 0

I Ride: 2010 FE390
I'll keep looking along the path you have laid before me. Hey, if I wanted to get parts easily I would have bought a Honda!


Cheers
Esto65 is offline  
November 17th, 2009, 02:47 PM   #9
Member
 
Joined: Jul 2008
From: Whitchurch-Stouffville, Ontario, Canada

Posts: 91
Thanks: 0

I Ride: 2010 FE390
I found a great resource for dellorto parts:

http://www.dellorto.co.uk
Esto65 is offline  
November 17th, 2009, 03:42 PM   #10
Moderator
 
berger's Avatar
 
Joined: Apr 2002
From: Phoenix Arizona

Posts: 3,150
Thanks: 9

I Ride: 2010 FX450
Any dealer can get both parts for you. I just ordered and recieved them both. There are several dealers here that will ship to you.
berger is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Fuel

Tags
bend, cable, fe400, ktm, part, throttle, tube



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Throttle Tube pollo Fuel 5 August 25th, 2018 09:00 PM
Throttle cable help! Thurston Mechanical 7 January 10th, 2013 05:58 AM
1998 600 throttle cable question scott600 Mechanical 5 February 3rd, 2012 09:19 AM
2004 FE450 Throttle cable ben_moto501 Husaberg 5 August 28th, 2011 11:03 PM
throttle cable problem BelgiqueBasterd Fuel 1 April 6th, 2008 11:20 AM


Facebook Twitter Google+ RSS Feed