Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Exhausts

Exhausts Exhausts - Headers, Mid Pipes, Mufflers


Thanks Tree3Thanks
  • 2 Post By Noubazor
  • 1 Post By Noubazor
Reply
 
LinkBack Thread Tools Display Modes
July 20th, 2017, 03:09 AM   #1
Junior Member
 
Joined: May 2015
From: Belgium

Posts: 26
Thanks: 25

I Ride:
Exhaust central Manifold Compatibility husaberg 2009+ FE vs FS

Hi everybody

By looking at the number of the central/manifold part, I realized that there were 4 ref no .....

For the 390/450/570 FE:

EU model with lambda sensor: 81205008000
US / AU model without lambda sensor: 81205108000

For the 570 FS:

EU model with lambda sensor: 81205208000
US / AU model without lambda probe: 81205308000

So my question: anyone to already mount a central part of FE on a FS or vice versa?

Someone knows it the difference FE/FS ?

Last edited by Noubazor; August 2nd, 2017 at 10:44 AM.
Noubazor is offline  
 
August 1st, 2017, 10:43 AM   #2
Junior Member
 
Joined: May 2015
From: Belgium

Posts: 26
Thanks: 25

I Ride:
I was able to make pictures,

Above an FS model
Below a model FE 450/570








So the difference is on the back, the FS model is a bit longer, the nesting with the silencer is slightly different and the last curvature is a bit different

I can understand that the curvature is different because the exhaust of the SF is not fixed in the same way as on the FE; On the fs there are spacers in order to prevent the wider tire from coming into contact with the muffler and so the central part had to be slightly different for the exhaust-silencer connection to be properly aligned

But I do not understand the difference in length ....

Finally I believe it is possible to mount a central part of FS on an FE or vice versa

One day I would try to climb the 2 to see
Thanks from jon andersson and tourist

Last edited by Noubazor; August 1st, 2017 at 10:49 AM.
Noubazor is offline  
August 1st, 2017, 11:02 AM   #3
Senior Member
 
Rainerio's Avatar
 
Joined: Jun 2013
From: San Francisco CA. USA

Posts: 833
Thanks: 187

I Ride: 7 Husabergs two FE570S,FS570 FE390/450,07 FE650,05 FE550,2 Husqvarna's 86 WR400,87 510,09 Buell
Because the is stroke from 570 to 450/390 is different the exhaust is off a little. And what said about the wide tire makes sense.
Rainerio is offline  
August 2nd, 2017, 08:40 AM   #4
Junior Member
 
Joined: May 2015
From: Belgium

Posts: 26
Thanks: 25

I Ride:
the central manifold FE 570 Is différent from FS 570

The difference in height at the cylinder 570 vs 450/390 Is compensated by the front manifold
Thanks from tourist
Noubazor is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Exhausts

Tags
2009, compatibility, exhaust, husaberg, manifold



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Husaberg FE/TE/FX/FS 09-12 compatibility datahop Husaberg 2 July 12th, 2017 01:21 AM
Early Husaberg Exhaust Compatibility VOR165 Exhausts 8 January 13th, 2017 09:14 AM
KTM exhaust compatibility HusaDawg1 Husaberg 1 May 9th, 2016 12:09 AM
husaberg fe 450 2012 rear wheel upgrade kit compatibility turokrem Wheels and Tires 4 September 15th, 2015 01:29 AM
Husaberg SEM stator & coil compatibility w/ '88 Husky TE CCMcC Electrical 4 July 14th, 2005 10:29 AM


Facebook Twitter Google+ RSS Feed