Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Exhausts

Exhausts Exhausts - Headers, Mid Pipes, Mufflers


Reply
 
LinkBack Thread Tools Display Modes
October 8th, 2009, 08:54 PM   #1
Senior Member
 
FC501EAST's Avatar
 
Joined: Mar 2002
From: SCARBOROUGH, ME.

Posts: 438
Thanks: 0

I Ride:
'98 fc501 Muffler

Hi, gang....
Anybody recall if the internal baffle in the rear of the OEM '98 fc501 muffler ( the one shaped like a tin banana!) is attached to the perf. core, or does it just become attached due to typical exhaust heat? I checked down through the Exhaust forum, but found no real applicable answer. Pain in the butt if it is attached!!
FC501EAST is offline  
 
October 9th, 2009, 04:19 AM   #2
Senior Member
 
Parsko's Avatar
 
Joined: Mar 2003
From: Waterbury, Connecticut, USA

Posts: 581
Thanks: 0

I Ride:
Hi Gary,

Not sure if this will help. But, I recall trying to re-baffle mine, and I couldn't get the thing apart. I pulled all the screws from the can, but it wouldn't separate. Now, I don't recall trying wicked hodd, but I do know that I was not able to get it apart. That might imply that it is held in tougher than the fit you suggest. Did you get the guts out of yours?

-Parsko
Parsko is offline  
October 9th, 2009, 03:18 PM   #3
Senior Member
 
FC501EAST's Avatar
 
Joined: Mar 2002
From: SCARBOROUGH, ME.

Posts: 438
Thanks: 0

I Ride:
Hi, Parsko...
Yep all apart. Input and outlet caps out to reseal, and had to pull the core/baffle assembly out the rear of the can because the baffle wouldn't pass the welds at the bend. Was going to use a wrap-type repack, bit now will probably put core/baffle back in and reseal outlet cap, then stuff a ktoom/type cartridge in the front.
Attached Images
 
FC501EAST is offline  
October 10th, 2009, 06:30 AM   #4
Senior Member
 
Parsko's Avatar
 
Joined: Mar 2003
From: Waterbury, Connecticut, USA

Posts: 581
Thanks: 0

I Ride:
Gary,

I'd appreciate if you could snap some pictures, so I have something to reference when I get around to doing the same thing myself. Is that possible?

-Parkso
Parsko is offline  
October 10th, 2009, 06:31 AM   #5
Senior Member
 
Parsko's Avatar
 
Joined: Mar 2003
From: Waterbury, Connecticut, USA

Posts: 581
Thanks: 0

I Ride:
Doh,

After I posted, I saw the picture. Don't ask how I didnt' see it first. I've only had one cup of coffee...

-Parsko
Parsko is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Exhausts

Tags
fc501, muffler



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Muffler repack Berg570FE Mechanical 2 May 17th, 2012 02:58 PM
Spark Arrestor/Muffler for a 2000 FC501 danielsfc501 Exhausts 2 July 21st, 2009 03:33 PM
FS 600 Muffler Husawhatsa Exhausts 2 November 19th, 2008 05:46 PM
new muffler BOSS Husaberg 8 August 17th, 2006 09:20 AM
Muffler Packing jmumme Exhausts 2 September 30th, 2005 09:45 AM


Facebook Twitter Google+ RSS Feed