Oil Dripping From Right Exhaust Header

HeyJohnnyPark · Jul 30, 2009

You can see oil residue down the front of the cylinder, and a bubble of oil on the right exhaust port header as it comes out of the cylinder.

What do you make of this? I tried turning the nut but it was already tight.

berger · Jul 30, 2009

Breather hose from the rocker cover to the air box/frame is likely split or pourous.

HeyJohnnyPark · Jul 30, 2009

Will check that, thanks. As for the Weep hole issue it is leaking Oil slightly, which seal do I need to replace?

HeyJohnnyPark · Jul 30, 2009

Looks like you are right, the hose has a cut near the clamp.

But When I was looking I noticed this connector that is not connected to anything do you know what it is?

berger · Jul 30, 2009

HeyJohnnyPark said:
Will check that, thanks. As for the Weep hole issue it is leaking Oil slightly, which seal do I need to replace?

Slight leak, don't worry about it. If you decide to go after it, replace the bearing and all related waterpump seals and o-ring.
You may consider an Orangeberg kit. A bit pricy, but they seemed to work well on the 2 bikes I installed them on.

kzoo · Jul 31, 2009

I'll second the orangeberg kit. Also when replacing the breather hose be careful tonot over tighten the hose clamp or you may cut the hose...

HeyJohnnyPark · Jul 31, 2009

yeah I think I caused that because when I got the bike I checked all the housed and tighten them pretty good, whoops.

Ghost · Aug 4, 2009

HeyJohnnyPark said:
When I was looking I noticed this connector that is not connected to anything do you know what it is?

That connection is used when you install the fan kit.

/Nick

HeyJohnnyPark · Aug 4, 2009

THANK YOU!! Ghost thank you! Now Can Get the Fans! If I choose

Oil Dripping From Right Exhaust Header

Help Support Husaberg:

HeyJohnnyPark

berger

Moderator

HeyJohnnyPark

HeyJohnnyPark

Attachments

berger

Moderator

kzoo

HeyJohnnyPark

Ghost

HeyJohnnyPark

Similar threads

Register CTA

Recent Discussions

Recent Discussions