Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Exhausts

Exhausts Exhausts - Headers, Mid Pipes, Mufflers


Reply
 
LinkBack Thread Tools Display Modes
December 7th, 2011, 02:21 AM   #31
Member
 
Joined: Dec 2011
From: Adelaide, Australia.

Posts: 64
Thanks: 1

I Ride: 2012 FE 390
Re: FMF Ti Powercore in Blue Anodized installed on FE570

Hi,

Would this work on a 2012 FE390? If so which "KTM Model" would i need to buy? And what would be required to make it fit?

I myself would love to have the Blue FMF 4.1 on my new berg

Thanks any help would be appreciated!
Thurston is offline  
 
December 7th, 2011, 07:34 AM   #32
Senior Member
 
Joined: Aug 2011
From: Northern Nevada

Posts: 532
Thanks: 23

I Ride: Husaberg FE570S and Buell S3
Re: FMF Ti Powercore in Blue Anodized installed on FE570

I put an FMF 4.1 Ti Factory muffler on my 570 recently. The difference in weight between it and the Husaberg factory muffler was roughly two pounds. Just by starting it in the garage - without even riding it - you can immediately tell that the engine breathes much, much better with the FMF muffler. Throttle response while riding is vastly improved. I don't have a dyno in my butt, but I think the FMF 4.1 is the best $300 I've spent since I bought the Husaberg.
Ruger is offline  
December 7th, 2011, 07:40 AM   #33
Senior Member
 
Joined: Sep 2009
From: Arroyo Grande, California

Posts: 196
Thanks: 0

I Ride:
Re: FMF Ti Powercore in Blue Anodized installed on FE570

I've been trying to tell people this..........
Barshoe is offline  
December 7th, 2011, 07:51 PM   #34
Member
 
Joined: Dec 2011
From: Adelaide, Australia.

Posts: 64
Thanks: 1

I Ride: 2012 FE 390
Re: FMF Ti Powercore in Blue Anodized installed on FE570

Alright thankyou very much for confirming the FMF 4.1 is the way to go.

If i order a KTM Model muffler, will it bolt straight onto the berg? If so which muffler would be best to get for a FE390... Would the 2011 450EXC model be the best suited?

Reason for ordering a KTM muffler is because it'll allow me to get the Anodized blue can


Thanks!
Thurston is offline  
December 7th, 2011, 07:51 PM   #35
Member
 
Joined: Dec 2011
From: Adelaide, Australia.

Posts: 64
Thanks: 1

I Ride: 2012 FE 390
Re: FMF Ti Powercore in Blue Anodized installed on FE570

Alright thankyou very much for confirming the FMF 4.1 is the way to go.

If i order a KTM Model muffler, will it bolt straight onto the berg? If so which muffler would be best to get for a FE390... Would the 2011 450EXC model be the best suited?

Reason for ordering a KTM muffler is because it'll allow me to get the Anodized blue can


Thanks!
Thurston is offline  
December 7th, 2011, 07:58 PM   #36
Member
 
Joined: Dec 2011
From: Adelaide, Australia.

Posts: 64
Thanks: 1

I Ride: 2012 FE 390
Re: FMF Ti Powercore in Blue Anodized installed on FE570

Heres the link to what I'm refering too: http://www.fmfracing.com/Products/BikeA ... KTM_450EXC

It's the Blue factory 4.1.

Just want to know it'll fit the 2012 fe390 husaberg before i buy it.


Thanks!
Thurston is offline  
December 8th, 2011, 07:22 AM   #37
Senior Member
 
Joined: Nov 2011
From: Nordic countries

Posts: 1,073
Thanks: 500

I Ride: 3x FE570
Re: FMF Ti Powercore in Blue Anodized installed on FE570

It looks like the mufflers on that site only have 1 pad-eye, your 390 have 2. Also that pipe that goes to the header looks different.
But then again if you look at this link: http://www.fmfracing.com/Products/Bi...HUSABERG_FE390 they look the same as in your link, so I guess they fit?

I do know that my FE570 muffler fit my friends KTM 250 EXC -06. I had a FE390 before my 570 and that muffler looks the same. My impression is that mufflers are quite compatible over model and brand when it comes to KTM-Husaberg.

Maybe send them an email and ask, they should know.
jon andersson is offline  
December 8th, 2011, 10:02 PM   #38
Member
 
Joined: Dec 2011
From: Adelaide, Australia.

Posts: 64
Thanks: 1

I Ride: 2012 FE 390
Re: FMF Ti Powercore in Blue Anodized installed on FE570

Yeah thats the problem i think all the images are just there for display purpose's only. I don't think they have a photo of each model. As for the header i don't plan on getting one (well not a KTM one anyway because I know there different) Just want to get a slip on for now.

As for sending an email, FMF said they haven't got a Husaberg in to test a KTM muffler's fitment, so they told me to contact my dealer... Who also doesn't know.

My mates coming around with his 2011 250EXC-F tonight so were going to swap mufflers and see, I'm guessing the 450 model muffler would be the same as the 250.

Although I'm still thinking about a Akrapovic...? What's peoples thoughts on them?
Thurston is offline  
December 8th, 2011, 10:25 PM   #39
Member
 
Joined: Jan 2011
From:

Posts: 88
Thanks: 0

I Ride:
Re: FMF Ti Powercore in Blue Anodized installed on FE570

Not sure why you are making this difficult on yourself. This thread shows a blue ktm can on a berg, no problems. The KTM 4 stroke mufflers all use the same mounting pattern. As an example I replaced my stock overly restrictive muffler with one from an 09 530xcw. A friend replaced his with one from an 07 250sx. Both fit perfectly.
UPSguy is offline  
December 8th, 2011, 11:51 PM   #40
Member
 
Joined: Dec 2011
From: Adelaide, Australia.

Posts: 64
Thanks: 1

I Ride: 2012 FE 390
Re: FMF Ti Powercore in Blue Anodized installed on FE570

I'm just a bit concerned if I order it and ship it all the way from the US to Australia and it get's here and it doesn't fit. Then I'm stuck with it. Also the one pictured on this thread is a powercore 4 I believe? I'm after the 4.1 in blue. So basically your saying it doesn't matter what FMF KTM Model i order they are all the same and fit the same?
Thurston is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Exhausts

Tags
anodized, blue, fe570, fmf, installed, powercore



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
coolant leak after fan installed matikrimerman Cooling Systems 1 April 22nd, 2013 04:30 PM
Blue anodized oil cap MrSmooth Husaberg 3 December 22nd, 2010 11:21 AM
Have 19" Blue Berg Rear Wheel, lookin to trade to 18" Blue ls1yj Wheels and Tires 6 May 25th, 2010 05:16 AM
installed some new pro tapers drgnrydr Husaberg 3 July 9th, 2008 07:30 PM


Facebook Twitter Google+ RSS Feed