Go Back   Husaberg Forum > Mechanical and Technical > Electrical

Electrical Electrical Forum - wiring and more

LinkBack Thread Tools Display Modes
February 9th, 2009, 05:39 AM   #1
Joined: Feb 2009
From: Bulgaria

Posts: 56
Thanks: 0

I Ride:
The Bracket for Steering Damper is rubbing wires FE450 '09

Greetings All!

I noticed that there is very little clearance behind the connector for the lights and engine stop and the bracket for the steering damper. Here is a picture:

I removed the connector from the plate holding it, as the plate is made from very soft metal and is bending easily. I attached the connector in front of the plate with zip-tie. Hope this helps.
sabink is offline  
February 9th, 2009, 10:02 AM   #2
Senior Member
Joined: Dec 2008
From: Bucks. region ,South East UK

Posts: 279
Thanks: 0

I Ride:
Welcome Sabink and thanks for the info.

I seem to remember just bending an angle on the plate to keep it clear from the damper bracket on my fe570.
But i will certainly check mine again.

NKW570 is offline  

  Husaberg Forum > Mechanical and Technical > Electrical

bracket, damper, fe450, rubbing, steering, wires

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
RTT steering damper Tikka Tech 0 March 2nd, 2011 04:38 AM
Best Steering Damper for '09 FE 570? CodeMonkey Suspension 1 August 29th, 2009 04:59 PM
scotts steering damper fe450 2010 dustysweep Husaberg 2 July 16th, 2009 05:17 PM
Steering Damper? wvbergdealer Suspension 18 September 23rd, 2008 04:31 AM
msc steering damper. cypher Suspension 5 July 30th, 2007 03:46 AM

Facebook Twitter Google+ RSS Feed